Hello everyone,  today we introduce a complete production line of 45-50 tons of used wood pellets installed by TONY for the customer.

The  customer's raw material is waste wood, the moisture is about 40%,  the customer ordered us 10 sets of TYJ-860 pellet machine, the power of a single pellet machine is 280kw,  1 set comprehensive chipper,4 sets effective hammer mill,4 sets Three-Layer Rotary Drum Dryer, 2 sets large coolers, 2 sets ton packing machines, the main processing process: crushing,fine crushing, drying, pelleting, cooling, packing

1. Crushing Process: The buyer uses our comprehensive chipper -TPC1850, grinding waste wood into 35mm-45mm wet wood chips

2. Fine Crushing Process: Through the effective hammer mill - model TFD100-200,  the wet wood chips of 35mm ~ 45mm are crushed into wet sawdust of 10mm ~ 14mm

3. Drying Process: Through the three-layer rotary drum dryer,  the wet sawdust with water content of 30-40% is dried to about 10-15% dry sawdust. This production line designs four three-layer dryers for customers to meet the production demand

4. Pelleting Process: Dry sawdust is physically extruded into 6-8mm rod-like particles by TYJ-860 pellet machine.

5.Cooling Process:Automatic cooling, automatic air cooling through the cooler separator to cool the pellet temperature

6. Packing Process:The cooled pellets are transported to the ton packing machine, and each bag can pack 1 ton of pellets