1.图片

Project Brief Introduction:

1.Product:Dried Straw Pellet Line

2.Capacity:12.5-15 T/Hour

3.TONY Brand 12.5-15 Ton /Hour Dried Straw Pellet Line Project Process

4.Main Machine: Straw Cutter,Hammer Mill,TONY Pellet Machine TYJ760-Ⅲ-160KW,Pellets Cooler,Packing Machine And Belt Conveyors

5.Total Power: About 1830 kw

6.Need Area: About  ㎡  L: M  W: M  H: M

Project Layout For Customer:

3D图3

原材料图+颗粒机图片

1. The working principle of dried straw biomass pellet processing equipment

Straw biomass pellet processing equipment is used to chop and compress bundled or baled straw and other biomass materials into pellet fuel. The equipment works by first using a crusher to break the straw into small pieces approximately 5 cm in diameter. The crusher then grinds the crushed straw into sawdust with a particle size of 4-14 mm. This sawdust is then pressed and formed in a pelletizer to produce pelletized biomass fuel that meets quality standards.

2. Characteristics of dried straw biomass pellet processing equipment

(1) Gear drive, strong extrusion force: The large gear drive system provides strong extrusion force to ensure the density and quality of the pellets.

(2) Low energy consumption, high output: The equipment design focuses on energy efficiency and can achieve higher output with lower energy consumption.

(3) Easy to operate: Biomass pellet processing equipment usually has a simple and easy-to-understand operation interface and process, which is convenient for workers to operate.

(4) Strong adaptability: It can adapt to different types and forms of sugarcane raw materials.

(5) Easy maintenance: The equipment structure design takes into account the convenience of daily maintenance, such as easy replacement of wear parts.

(6) High safety: Various safety protection measures are incorporated into the equipment design, such as devices to prevent the entry of hard objects such as metal, and emergency stop buttons, etc.

3. Application scenarios of dried straw biomass pellet processing equipment

(1) Industrial boiler fuel

Application targets: Industrial enterprises that require a stable heat source, such as textile mills, paper mills, food processing plants, and chemical plants (such enterprises traditionally rely on coal-fired boilers, which puts great pressure on environmental protection).

(2) Civilian clean heating/cooking

Application targets: Winter heating, home cooking, and decentralized energy needs in small places such as homestays and farmhouses.

(3) Biomass power generation/cogeneration

Application targets: Small and medium-sized biomass power plants (installed capacity 10-30MW), industrial park cogeneration projects (providing electricity and steam for the park).

(4) Agricultural and animal husbandry auxiliary

Application targets: Organic fertilizer production enterprises, flower and seedling planting bases.s

2.图片

TONY Brand 12.5-15 TPH Dried Straw Line can process dried straw and various biomass materials related to agricultural waste into biomass pellets. Straw processing into biomass pellets has a wide range of uses .As fuel: straw pellet fuel can be used as boiler fuel for power plants, industrial boilers, civil heating and other fields. Its calorific value is similar to coal, but the price is lower, and the combustion process produces fewer pollutants, is a more environmentally friendly fuel. As feed: Straw pellets processed by straw pellet machining can be used as feed for livestock. This method can make full use of crop straw, reduce feed costs, and also help solve the problem of straw disposal. These uses can not only effectively use agricultural waste, reduce environmental pollution, but also create economic benefits and promote sustainable agricultural development.

1. Capacity: 12.5-15 Ton/Hour

2. Raw materials: Dried straw, including dried corn straw, dried wheat straw, dried cotton straw, dried flax straw, dried beet straw and other agricultural straw

3. Moisture: About 10-15%

4. Application: All kinds of  biomass materials suitable for pellet production.

Suitable customers: Green energy companies, agricultural cooperatives, and small - scale rural processing units that have ready access to straw and related agricultural residues.

5. Finished Pellets Markets: Large power plants, domestic heating systems in rural and suburban areas, industrial heating facilities in rural - based industries, combustion heat applications in local manufacturing units, heating systems in rural schools and community centers, boiler rooms in small - scale rural enterprises, and canteens in rural educational institutions.,farms, feed mills.

3.图片

图片

原材料--成品图

1. Project Name: Dried Straw Production Line

2. Raw Material: Bales of Dried Straw

3. Moisture Content of Raw Material: 10-15%

4. Capacity: 12.5-15TPH

5. Process: Grinding Process - Fine Crushing Process - Pelletizing Process - Cooling Process - Packing Process

6. Main Equipment: Straw Cutter -TPX2500-110kw, Effective Hammer Mill- TFD85*220-220kw, TONY Pellet Machine-TYJ760-III-160kw, Galvanized Pellets Cooler, Ton Packing Machine and Belt Conveyors

4.图片

流程图1

流程图.

5.图片

原材料+颗粒图

颗粒+机器图

3D图 图1-长宽

3D图  图2-高

3D图  图3

5.1图片

TPX2000-90kw旋切机图

带原材料-成品图

1.Grinding Process:

A.The process is mainly used to grind dried straw within 2.2m in diameter into dried straw pieces. The rotary cutting mode of the outer chain of the gear, the rotary cutting rotor blade is sharp, and the blade types are various, which can be rotated to cut various bales of straw with different diameters, different thicknesses, different lengths and different water contents

B.TONY brand straw cutter TPX2500-110kw models *3sets

C.Capacity:4-5Ton/Hour/Set

Main Parts:

(1)Tony's New Straw Cutter

(2)Enlarged Turntable

(3)Rotary Cutting System

(4)Drive system

(5)Electrical Cabinet.

5.2图片

高效粉碎机

带锯末图

2.Fine Crushing Process：

A. The process is mainly used to crush 60-70mm dried straw pieces into 8-14mm dried straw dust.

B.TONY brand effective hammer mill TFD85*220-220kw *2sets.

C.Capacity: 12.5-15 tons/hour.

Main parts:

(1)TONY Effective Hammer Mill

(2)Galvanized Dust Collector.

(3)Sawdust Conveying Fan.

(4)Cyclone With Airlock.

(5)Electrical Cabinet.

5.3图片

颗粒机四件套带 原材料，颗粒图

3.Pelletizing Process:

A.This process is mainly used to products pellets with φ6-8mm.

B.TONY brand vertical ring die pellet machine TYJ760-Ⅲ-160kw *5sets

C. Capacity:12.5-15Ton/Hour.

D.Double Screw Cycling Silo is added above the pellet machine, which has the advantages of saving space, saving labor, intelligently controlling the feeding speed, not easy to block the material, and improving production efficiency.

Main Parts:

(1)TONY New Vertical Ring Die Pellet Machine.

(2)Cyclone And Bags Dust Collectors.

(3)Bearings Automatic Lubrication System.

(4)Electrical Cabinets.

For more equipment details and information, you can contact TONY

5.4图片

镀锌冷却机+颗粒图

4.Cooling Process:

A.This process is mainly used to cool pellets from 80-90℃ to 20-30℃

B.TONY brand galvanized pellets cooler*1set

C.Capacity:12.5-15 Ton/Hour.

Main Parts:

(1)TONY's new Galvanized Pellets Cooler Separator With Vibrating Screen.

(2)Cyclone and bags dust collectors.  

(3)Fan Blower.

(4)Connect Pipes.

5.5图片

吨包机

5. Packing Process:

A.This process is mainly used to pack pellets into 1ton/bags. 

B.TONY brand ton packing machine*1set

C.Capacity: 12.5-15Ton/Hour

Main Parts: 

(1)TONY Ton Packing Machine

(2)Electronic Platform Scale Metering System

(3)Automatic Tare, Zero, and Drop Correction Functions

(4)Feeding System Features Fast, Medium, and Slow Feeding Speeds to Ensure Measuring Accuracy

6.图片

客户生产案例图

7.图片

图 秸秆捆+颗粒 颗粒机

Project advantages: market competitiveness and environmental value

1.Excellent product characteristics and strong market competitiveness

Biomass pellets have many excellent characteristics. They have a high calorific value, generally 3600-4800 kcal/kg, close to medium-quality coal, and can provide sufficient heat; they have a low ash content, with very little ash residue after combustion, which reduces cleaning costs and reduces environmental pollution; they have low emissions, extremely low sulfur content (usually <0.05%), and low nitrogen content. Pollutants such as sulfur dioxide and nitrogen monoxide produced during the combustion process are much lower than those produced by burning coal, meeting strict environmental protection standards and are highly favored by customers with high environmental protection requirements. In addition, biomass pellets have a regular shape, mostly cylindrical, with a diameter of 6-12 mm and a length of 20-50 mm. The density can reach 0.8-1.2 g/cm3, high hardness, not easy to break, easy to store and transport, further enhancing the market competitiveness of the product.

2.Significant environmental benefits and high social value

The development of the biomass pellet industry aims to turn agricultural and forestry waste into treasure, realize resource recycling, and reduce waste pollution to the environment. At the same time, the carbon dioxide emitted during the combustion of biomass pellets is largely offset by the carbon dioxide absorbed by plant growth, achieving "carbon neutrality," helping to mitigate the greenhouse effect and improve air quality. This not only complies with national environmental protection policies, but also helps entrepreneurs establish a positive corporate image, create a good social reputation, and generate potential business opportunities.

8.图片

秸秆图加颗粒图

The main reasons for using straw to make fuel pellets are its environmental and economic benefits. Straw is a renewable biomass resource. Turning it into fuel pellets not only reduces waste generation and disposal, but also conserves energy and raw materials, reduces carbon emissions, and possesses high economic value.

Specific advantages of straw fuel pellets include:

1.Environmental benefits:

Straw fuel pellets can reduce greenhouse gas emissions and mitigate environmental pollution.

2.Economic benefits:

Straw fuel pellets are low-cost, with a market price of approximately 700 to 800 yuan per ton. They can replace coal and offer greater economic benefits.

3.Resource utilization:

Straw is an agricultural and forestry waste. Turning it into fuel pellets fully utilizes this resource and avoids waste.

9.图片

绿色地球+原材料+颗粒图

10.图片

How To Order One Set TONY Pellet Line That Belongs To You? Please Refer To The Following Professional Suggestions.TONY Can Always Supply You The High Quality Products With Excellent Service.

1. Pls confirm what is your raw material first?

Raw material of  TONY pellet machine can be all kinds of biomass which can be burned directly.

2. Pls confirm what is the size of your raw material?

If your raw material is wood log or wood pallets which size is big,then you will need wood chipper.

If your raw material is wood chips then you will need the hammer mill.

3. ls your raw material wet or dried?

The best raw material before pellet machine should be 6-14mm sawdust with moisture 10-15%,If your raw material is dried,then you will also need the dryer.

4. After that ,pls confirm what is the capacity do you need per hour for the finished pellets?

TONY can supply pellet production line from 0.8T/Hour up to 100T/Hour

5. Will you need the pellets cooler?

The temperature after the pellet machine will be about 70-80℃,it is better to use pellets cooler to cool down pellets  from 80℃ to 20-30℃ for quality pellets

6. Will you need the pellets packing machine?

We have 15-50KG/Bag packing machine and also ton packing machine for your choose

7. Will you need the automatic pellet production line?

If you need the full automatic pellet production line,you will need storage bin for each process which will add your  total cost for sure.

8. Does TONY pellet line has in stock?

As different customer has different raw materials, the ring die has to be customized according to customer needs.

9. What is the final pellets size can TONY pellet line be made?

The finished pellets diameter can be 6-12 mm by changing different hole size ring die,and length will be 1-6 cm which  can be adjustable by the cutting knife.

11.图片

公司展会图