1.图片

Project Brief Introduction:

1.Product:Wet Straw Pellet Line

2.Capacity:15-18 T/Hour

3.TONY Brand 15-18 Ton /Hour Wet Straw Pellet Line Project Process

4.Main Machine: Straw Cutter,Hammer Mill,Large Hydraulic Storage Silo,Rotary Drum Dryer,TONY Pellet Machine TYJ760-Ⅲ-160KW,Pellets Cooler,Packing Machine And Belt Conveyors

5.Total Power: About 2400 kw

6.Need Area: About  ㎡  L: M  W: M  H: M

Project Layout For Customer:

3D图3

原材料图+颗粒机图片

1. The working principle of  wet straw biomass pellet processing equipment

The principle of wet straw biomass pellet processing equipment is to compress the originally dispersed, shapeless raw materials into a fixed-shape, dense pelletized fuel through mechanical pressure. The selection and configuration of this type of equipment directly impacts production efficiency and pellet quality. Understanding its core components and key parameters can help you better match your production needs.

2. Characteristics of  wet straw biomass pellet processing equipment

(1) Low pollution emissions: The drying system mostly uses clean energy (such as natural gas, biomass gas) or supporting exhaust gas treatment equipment to reduce dust and harmful gas emissions; the small amount of scraps generated during the production process can be recycled to achieve zero waste of raw materials.

(2) Energy consumption optimization: Some equipment uses variable frequency motors to control feeding and pelletizing speeds, and can adjust power output according to material characteristics to avoid idle consumption; at the same time, the friction heat generated during the extrusion molding process can assist in drying the material and reduce additional heating energy consumption.

(3) Wide adaptability of raw materials: In addition to dehumidifying straw, it can also process various agricultural and forestry wastes such as wet wood chips, sugarcane bagasse, peanut shells, etc., with a wide range of applications.

(4) Customizable output: From small single machines to large production lines, it can be flexibly configured according to the user's raw material supply and market demand, which can meet both small-scale processing needs of farmers and large-scale production needs of enterprises.

3. Application scenarios of  wet straw biomass pellet processing equipment

(1) Regional heating supporting processing: Central heating projects in rural areas or small towns can be equipped with wet straw pellet processing equipment to process local wet straw into pellets and then feed them into biomass heating boilers, providing residents with clean heating services, replacing traditional loose coal heating and reducing winter smog pollution.

(2) Distributed power generation supporting processing: In distributed biomass power generation projects in remote areas (such as mountainous areas and rural areas), equipment can process local wet straw nearby to provide stable pellet fuel for small generators, solving the problem of insufficient power supply in remote areas and realizing a localized energy cycle.

2.图片

TONY Brand 15-18 TPH Wet Straw Line can process wet straw and various biomass materials related to agricultural waste into biomass pellets. Straw processing into biomass pellets has a wide range of uses .As fuel: straw pellet fuel can be used as boiler fuel for power plants, industrial boilers, civil heating and other fields. Its calorific value is similar to coal, but the price is lower, and the combustion process produces fewer pollutants, is a more environmentally friendly fuel. As feed: Straw pellets processed by straw pellet machining can be used as feed for livestock. This method can make full use of crop straw, reduce feed costs, and also help solve the problem of straw disposal. These uses can not only effectively use agricultural waste, reduce environmental pollution, but also create economic benefits and promote sustainable agricultural development.

1. Capacity: 15-18 Ton/Hour

2. Raw materials: Wet straw, including wet corn straw, wet wheat straw, wet cotton straw, wet flax straw, wet beet straw and other agricultural straw

3. Moisture: About 30-35%

4. Application: All kinds of  biomass materials suitable for pellet production.

Suitable customers: Green energy companies, agricultural cooperatives, and small - scale rural processing units that have ready access to wet straw and related agricultural residues.

5. Finished Pellets Markets: Large power plants, domestic heating systems in rural and suburban areas, industrial heating facilities in rural - based industries, combustion heat applications in local manufacturing units, heating systems in rural schools and community centers, boiler rooms in small - scale rural enterprises, and canteens in rural educational institutions.,farms, feed mills.

3.图片

图片

原材料--成品图

1. Project Name: Wet Straw Production Line

2. Raw Material: Bales of  Wet Straw

3. Moisture Content of Raw Material: 30-35%

4. Capacity: 15-18 TPH

5. Process: Grinding Process - Fine Crushing Process - Straw Dust Storage Process-Drying Process-Pelletizing Process - Cooling Process - Packing Process

6. Main Equipment: Straw Cutter -TPX2500-132kw, Effective Hammer Mill- TFD85*250-250kw, TONY Large Hydraulic Storage Silo,Rotary Drum Dryer-2.5*24m ,TONY Pellet Machine-TYJ760-III-160kw, Galvanized Pellets Cooler, Ton Packing Machine and Belt Conveyors

4.图片

流程图1

流程图.

5.图片

原材料+颗粒图

颗粒+机器图

3D图 图1-长宽

3D图  图2-高

3D图  图3

5.1.图片

TPX2500-132kw旋切机图

带原材料-成品图

1.Grinding Process：

A.The process is mainly used to grind wet straw within 2.2m in diameter into wet straw pieces. The rotary cutting mode of the outer chain of the gear, the rotary cutting rotor blade is sharp, and the blade types are various, which can be rotated to cut various bales of straw with different diameters, different thicknesses, different lengths and different water contents

B.TONY brand straw cutter TPX2500-132kw models *3sets

C.Capacity:4.5-5Ton/Hour/Set

Main Parts:

(1)Tony's New Straw Cutter

(2)Enlarged Turntable

(3)Rotary Cutting System

(4)Drive system

(5)Electrical Cabinet.

5.2图片

高效粉碎机

带锯末图

2.Fine Crushing Process：

A. The process is mainly used to crush 60-70mm wet straw pieces into 8-14mm wet straw dust.

B.TONY brand effective hammer mill TFD85*250-250kw *2sets.

C.Capacity: 15-18 tons/hour.

Main parts:

(1)TONY Effective Hammer Mill

(2)Galvanized Dust Collector.

(3)Sawdust Conveying Fan.

(4)Cyclone With Airlock.

(5)Electrical Cabinet.

5.3图片

图片

大型液压料仓

3.Straw Dust Storage Process:

A. This process is mainly used to storage the straw dust that comes out of the hammer mill.It is hydraulic galvanized storage silo which is more stable and straw dust in it is not easy to be blocked. 

B.TONY Brand Large Hydraulic Storage Silo to storage the straw dust that comes out of  the hammer mill.This process can be optional by customer.If customer do not chose the storage bin,he can storage the sawdust on the ground directly which may need some labour.                        

Main Parts:                                                                                                                                   

(1)TONY's new Large Hydraulic Storage Silo.

(2)With Screws Inside the Storage Bin to Prevent Straw Dust Blocked.

5.4图片

4.Drying Process: 

A.This process is mainly used to dry the straw dust from 30-35% to 10-15%.  B.Capacity: 15-18 Ton/Hour. 

C.TONY use 2 sets of 2.5*24m rotary drum dryer for this process,TONY hot stove is made of firebrick pan, shell with H steel plate as the frame.   There are 3 layers of fire blocking device inside, which can effectively prevent the fire from entering the tumble dryer.Customers can choose to use waste wood, biomass pellets, natural gas, etc. as fuel for the hot air furnace

TONY dryer use spiral tube material, and is not easy to deform.Unlike other manufacturers with iron plate splicing welding, very easy to deformation.

Main Parts: 

(1)TONY's Rotary Drum Dryer Main Body.(Reducers With Motors and Pips)

(2)TONY's  Hot Stove.

(3)Fan Blower+Cyclone With Airlock.

5.5图片

颗粒机四件套带 原材料，颗粒图

5.Pelletizing Process:

A.This process is mainly used to products pellets with φ6-8mm.

B.TONY brand vertical ring die pellet machine TYJ760-Ⅲ-160kw *6sets

C. Capacity:15-18Ton/Hour.

D.Double Screw Cycling Silo is added above the pellet machine, which has the advantages of saving space, saving labor, intelligently controlling the feeding speed, not easy to block the material, and improving production efficiency.

Main Parts:

(1)TONY New Vertical Ring Die Pellet Machine.

(2)Cyclone And Bags Dust Collectors.

(3)Bearings Automatic Lubrication System.

(4)Electrical Cabinets.

For more equipment details and information, you can contact TONY

5.6图片

镀锌冷却机+颗粒图

6.Cooling Process:

A.This process is mainly used to cool pellets from 80-90℃ to 20-30℃

B.TONY brand galvanized pellets cooler*2sets

C.Capacity:15-18 Ton/Hour.

Main Parts:                                                                                                                                   

(1) TONY's new Galvanized Pellets Cooler Separator With Vibrating Screen.

(2) Cyclone and bags dust collectors.  

(3) Fan Blower.

(4) Connect Pipes.

5.7图片

吨包机

7.Packing Process:

A.This process is mainly used to pack pellets into 1Ton/Bags. 

B.TONY brand ton packing machine*2sets

C.Capacity: 15-18 Ton/Hour

Main Parts: 

(1)TONY Ton Packing Machine

(2) Electronic Platform Scale Metering System

(3) Automatic Tare, Zero, and Drop Correction Functions

(4)Feeding System Features Fast, Medium, and Slow Feeding Speeds to Ensure Measuring Accuracy

6.图片

客户生产案例图

7.图片

图 秸秆捆+颗粒 颗粒机

Equipment Configuration for Wet Straw Processing into Biomass Pellets: Matching Production Capacity with Raw Material Characteristics

Equipment is the core asset of a project. An appropriate production line must be selected based on planned production capacity and budget to avoid wasted or insufficient production capacity.

1. Small Projects:

 Suitable for start-ups or those with limited funding. Configurations include a straw rotary cutter, pulverizer, drum dryer, a single pelletizer, and a simple cooling screen.

2. Medium Projects: 

Suitable for projects with stable raw materials and sales channels. Configurations include an automated loading system, a high-efficiency pulverizer, a continuous dryer, multiple pelletizers, a cooler, and a packaging machine to reduce labor costs and improve production efficiency.

3. Key Equipment Requirements: 

The dryer must be compatible with the high moisture content of wet straw, and pelletizer molds must be made of wear-resistant materials (such as alloy steel) to mitigate wear from wet materials.

8.图片

秸秆图加颗粒图

Straw biomass pellet raw material characteristics: Wide availability, low cost, and sustainable production.

Raw materials are the foundation of pellet production, and their characteristics determine the feasibility and profitability of the project.

1. Wide availability of raw materials: 

Raw materials include agricultural waste such as corn stalks, wheat straw, rice stalks, and peanut shells. This eliminates reliance on scarce resources and allows for local procurement, ensuring a long-term, stable supply of raw materials.

2. Low raw material cost: 

The purchase price of straw is significantly lower than that of coal and natural gas, equivalent to the cost of solid fuels. This low raw material cost makes the pellet price highly competitive in the market.

3. High raw material utilization rate: 

100% of the crushed impurities and substandard pellets generated during the production process can be recycled for reprocessing, resulting in a total raw material utilization rate exceeding 95%. The ash from pellet combustion is rich in potassium, calcium, and other elements and can be reused as organic fertilizer, completing a complete resource cycle from "straw - pellets - ash - fertilizer" with zero waste.

9.图片

绿色地球+原材料+颗粒图

10.图片

11.图片

公司展会图