1.图片

Project Brief Introduction:

1.Product:Wet Hay/Grass/Alfalfa Pellet Line

2.Capacity:1.5-2 Ton /Hour

3.TONY Brand 1.5-2Ton /Hour Wet Hay/Grass/Alfalfa Pellet Line Project Process

4.Main Machine: Straw Cutter,Hammer Mill,Rotary Drum Dryer,TONY Pellet Machine TYJ551-Ⅲ-110KW,Pellets Cooler,Packing Machine And Belt Conveyors

5.Total Power: About 300 kw

6.Need Area: About  ㎡  L: M  W: M  H: M

Project Layout For Customer:

3D图3

原材料图+颗粒机图片

1. The working principle of wet hay/grass/alfalfa biomass pellet processing equipment

Wet hay/pasture/alfalfa pellets are fuel pellets made from wet hay/pasture/alfalfa through grinding, crushing, drying, and pelleting. The production process mainly includes the following steps:

First, the wet hay/pasture/alfalfa is cleaned, cut, or dried to reduce its moisture content to below 15%. Then, the treated raw material is chopped using a rotary cutter and ground into sawdust using a grinder. Next, the sawdust is dried in a dryer until the moisture content is between 10% and 15%. Finally, the pellets are pressed into compact, uniformly sized, and smooth pellets using a pellet mill.

2. Characteristics of wet hay/grass/alfalfa biomass pellet processing equipment

(1) The wet hay/grass/alfalfa pellet biomass pellet processing equipment is characterized by high efficiency and low energy consumption, enabling rapid processing of biomass raw materials into fuel pellets and improving production efficiency.

(2) The biomass pellet machine is equipped with molds of various specifications, allowing for the selection of appropriate molds based on different biomass raw materials, thus improving processing adaptability.

(3) The biomass pellet processing equipment features a high degree of automation and good safety, effectively reducing labor intensity and improving production efficiency.

(4) The pellet biomass fuel processed by the wet hay/grass/alfalfa pellet biomass processing equipment has stable quality and specifications, meeting production standard requirements.

3. Application scenarios of wet hay/grass/alfalfa biomass pellet processing equipment

Pellets have a wide range of applications, encompassing rural life, industrial production, and commercial uses.

For example, in rural areas, pellet fuel is commonly used for cooking, heating, and cleaning.

In industrial production, pellet fuel is commonly used for power generation and heating, and large and medium-sized enterprises also widely use pellet fuel in their factories.

In the commercial sector, pellet fuel is widely used in places such as bathhouses, restaurants, and hotels.

2.图片

TONY Brand 1.5-2 TPH Wet Hay/Grass/Alfalfa Line can process wet grass and various biomass materials related to agricultural waste into biomass pellets. Grass processing into biomass pellets has a wide range of uses .As fuel: grass pellet fuel can be used as boiler fuel for power plants, industrial boilers, civil heating and other fields. Its calorific value is similar to coal, but the price is lower, and the combustion process produces fewer pollutants, is a more environmentally friendly fuel. As feed: grass pellets processed by grass pellet machine can be used as feed for livestock. This method can make full use of grass, reduce feed costs, and also help solve the problem of grass disposal. These uses can not only effectively use agricultural waste, reduce environmental pollution, but also create economic benefits and promote sustainable agricultural development.

1. Capacity: 1.5-2 Ton/Hour

2. Raw materials: Wet Hay/Grass/Alfalfa

3. Moisture: About 30-35%

4. Application: All kinds of  biomass materials suitable for pellet production.

Suitable customers: Green energy companies, agricultural cooperatives, and small - scale rural processing units that have ready access to wet grass and related agricultural residues.

5. Finished Pellets Markets: Large power plants, domestic heating systems in rural and suburban areas, industrial heating facilities in rural - based industries, combustion heat applications in local manufacturing units, heating systems in rural schools and community centers, boiler rooms in small - scale rural enterprises, and canteens in rural educational institutions.,farms, feed mills.

3.图片

图片

原材料--成品图

1. Project Name: Wet Hay/Grass/Alfalfa Production Line

2. Raw Material: Bales of Wet Hay/Grass/Alfalfa

3. Moisture Content of Raw Material: 30-35%

4. Capacity: 1.5-2 TPH

5. Process: Grinding Process - Fine Crushing Process - Drying Process-Pelletizing Process - Cooling Process - Packing Process

6. Main Equipment: Straw Cutter -TPX2000-55kw, Effective Hammer Mill-TFD65*55-45kw, Rotary Drum Dryer-1.6*12m ,TONY Pellet Machine-TYJ551-III-110kw, Galvanized Pellets Cooler, Semi-automatic Packing Machine and Belt Conveyors

4.图片

How To Use TONY Pellet Line To Proceed From Wet Hay/Grass/Alfalfa Into Pellets?

It mainly contains the following steps and machines as following:

1.Use TONY straw cutter to grind wet hay/grass/alfalfa bales φ ≤1.8m into 60-70mm wet hay/grass/alfalfa pieces.

2.Use TONY effective hammer mill to crush 60-70mm wet hay/grass/alfalfa pieces into 8-14mm wet hay/grass/alfalfa dust.

3.Use TONY rotary drum dryer to dry the 30-35% wet hay/grass/alfalfa dust into 10-15% dried hay/grass/alfalfa dust

4.Use TONY vertical ring die pellet machine to products pellets with φ6-8mm.

5.Use TONY galvanized pellets cooler to cool pellets from 80-90℃ to 20-30℃.

6.Use TONY semi-automatic packing machine to pack the pellets into 15-50kg/bags.

You can contact TONY to get for more details information and quotation.

TONY can supply you all the products as above with competitive price and excellent quality.

Main Machine List
NO Name Model QTY Brand
1 Straw Cutter TPX2000 1 TONY
2 Effective Hammer Mill TFD65-55 1 TONY
3 Rotary Drum Dryer THGD1.6-12 1 TONY
4 Pellet Machine TYJ551-III-110 1 TONY
5 Galvanized  Pellets Cooler TCN-1.5 1 TONY
6 Semi-automatic Packing Machine TBF-50 1 TONY
7 All Belt Conveyor TSP Series 5 TONY
8 EL.Cabinets TDD 6 TONY

流程图1

流程图.

5.图片

原材料+颗粒图

颗粒+机器图

3D图 图1-长宽

3D图  图2-高

Next, TONY Will Introduce To You All The Necessary Machinery That Will Be Used For The Whole Pellet Production Line. Some Machines Can Be Custom - Made By Customers According To Different Customers' Detailed Demands. Contact TONY For More Details, Including Quotation And Layout.
     
Straw Cutter Effective Hammer Mill Rotary Drum Dryer
1.To Grind Wet Hay/Grass/Alfalfa Bales Diameter ≤1.8 m Into 60-70mm Wet Hay/Grass/Alfalfa Pieces
2.Model:TPX2000-55kw*1Set
3.Capacity:1.5-2.5Ton/Hour/Set
1.To Crush 60-70mm Wet Hay/Grass/Alfalfa Pieces Into 8-14mm Wet Hay/Grass/Alfalfa Dust.
2.Model: TFD65*55-45KW*1Set
3.Capacity:1.5-2Ton/Hour/Set
1.To Dry The 30-35% Hay/Grass/Alfalfa Dust Into 10-15% Hay/Grass/Alfalfa Dust
2.Model: THGD1.6*12*1Set
3.Capacity:1.5-2Ton/Hour/Set
     
Vertical Ring Die Pellet Machine Galvanized Pellets Cooler Semi-automatic Packing Machine
1.To Press Hay/Grass/Alfalfa Dust Into 6-8mm Biomass Pellets
2.Model: TYJ551-III-110KW*1Set
3.Capacity:1.5-2Ton/Hour/Set
4.New 304SS Type
1.To Cool Pellets From 80-90℃ to 20-30℃
2.Model:TCN-1.5*1Set  
3.Capacity:1.5-2Ton/Hour
1.To Pack Pellets Into 15-50KG/Bags.
2.Model: TBF-50*1Set  
3.Capacity: 1.5-2Ton/Hour

3D图  图3

5.1图片

TPX2000-55kw旋切机图

带原材料-成品图

1.Grinding Process:

A.The process is mainly used to grind wet hay/grass/alfalfa within 1.8m in diameter into wet hay/grass/alfalfa pieces. The rotary cutting mode of the outer chain of the gear, the rotary cutting rotor blade is sharp, and the blade types are various, which can be rotated to cut various bales of grass with different diameters, different thicknesses, different lengths and different water contents

B.TONY brand straw cutter TPX2000-55kw models *1set

C.Capacity:1.5-2.5 ton/hour/set

Main Parts:

(1)Tony's New Straw Cutter

(2)Enlarged Turntable

(3)Rotary Cutting System

(4)Drive system

(5)Electrical Cabinet.

5.2图片

高效粉碎机

带锯末图

2.Fine Crushing Process:

A. The process is mainly used to crush 60-70mm wet hay/grass/alfalfa pieces into 8-14mm wet hay/grass/alfalfa dust.

B.TONY brand effective hammer mill TFD65*55-45kw *1set.

C.Capacity: 1.5-2 tons/hour.

Main parts:

(1)TONY Effective Hammer Mill

(2)Galvanized Dust Collector.

(3)Sawdust Conveying Fan.

(4)Cyclone With Airlock.

(5)Electrical Cabinet.

5.3图片

图片

3.Drying Process: 

A.This process is mainly used to dry the hay/grass/alfalfa dust from 30-35% to 10-15%.  

B.Capacity: 1.5-2 tons/hour.

C.TONY use 1set of 1.6*12m rotary drum dryer for this process,TONY hot stove is made of firebrick pan, shell with H steel plate as the frame.   There are 3 layers of fire blocking device inside, which can effectively prevent the fire from entering the tumble dryer.Customers can choose to use waste wood, biomass pellets, natural gas, etc. as fuel for the hot air furnace

TONY dryer use spiral tube material, and is not easy to deform.Unlike other manufacturers with iron plate splicing welding, very easy to deformation.

Main Parts: 

(1)TONY's Rotary Drum Dryer Main Body.(Reducers With Motors and Pips)

(2)TONY's  Hot Stove.

(3)Fan Blower+Cyclone With Airlock.

5.4图片

颗粒机四件套带 原材料,颗粒图

4.Pelletizing Process:

A.This process is mainly used to products pellets with φ6-8mm.

B.TONY brand vertical ring die pellet machine TYJ551-Ⅲ-110kw *1set

C. Capacity:1.5-2 tons/hour.

Main Parts:

(1)TONY New Vertical Ring Die Pellet Machine.

(2)Cyclone And Bags Dust Collectors.

(3)Bearings Automatic Lubrication System.

(4)Electrical Cabinets.

For more equipment details and information, you can contact TONY

5.5图片

镀锌冷却机+颗粒图

5.Cooling Process:

A.This process is mainly used to cool pellets from 80-90℃ to 20-30℃

B.TONY brand galvanized pellets cooler*1set

C.Capacity:1.5-2 tons/hour.

Main Parts:                                                                                                                                   

(1) TONY's new Galvanized Pellets Cooler Separator With Vibrating Screen.

(2) Cyclone and bags dust collectors.  

(3) Fan Blower.

(4) Connect Pipes.

5.6图片

半自动包装机

6. Packing Process:

A.This process is mainly used to pack pellets into 15-50KG/Bags. 

B.TONY brand semi-automatic packing machine* 1set.

C.Capacity:1.5-2 tons/hour.

Main Parts: 

(1)TONY's New Semi-Automatic Packing Machine. 

(2)Sew Machine, buyer Can Also Chose Hot Seal Machine For Chosen,To Confirm With TONY For The Price Difference. 

(3)Bags Transportation Conveyors.

(4)Feeding Inlet Silo.

(5)Electrical Cabinets.

6.图片

客户生产案例图

7.图片

图 湿草捆+颗粒 颗粒机

1. Waste Utilization, Unlimited Business Opportunities

In the countryside, waste such aswet hay/grass/alfalfa can be found everywhere, which used to be considered useless, but now become valuable raw materials for fuel pellet processing plants.

Through specific processing processes, these wastes can be converted into efficient and environmentally friendly fuel particles, which become hot products on the market. With the increasing severity of global environmental problems, the use of traditional coal and other energy sources has been limited, and biomass fuel particles, as a clean and renewable energy source, have gradually been favored by the market. It not only has high combustion efficiency, but also emits less pollutants, which is in line with the policy orientation of energy conservation and emission reduction.

2. Broad Market Prospects

The market prospect of fuel pellets is very broad.

On the one hand, with the development of the economy and the improvement of living standards, the demand for clean energy is growing, and biomass fuel particles, as a new type of clean energy, have great market potential. On the other hand, compared with traditional coal resources, biomass pellet fuel is clean and sanitary, low pollutant emissions, and can greatly alleviate the global energy shortage

At present, fuel particles have been widely used in home heating, industrial boilers, biomass power plants and other fields. With the continuous progress of technology and the continuous development of the market, the application range of fuel particles will be further expanded.

8.图片

草图加颗粒图

1. Appearance of Wet Hay/Grass/Alfalfa Pellets

Wet Hay/Grass/Alfalfa pellets are cylindrical, with a smooth, slightly glossy surface, a density greater than 1, a grayish-yellow color, an outer diameter of 6-9 meters, and a length of 10-36 mm.

2. Calorific Value of Wet Hay/Grass/Alfalfa

The calorific value per unit mass of Wet Hay/Grass/Alfalfa pellets refers to the amount of heat released during complete combustion. Due to their high density and high combustion efficiency, Wet Hay/Grass/Alfalfa pellets can reach a core temperature of 1100°C during combustion, a calorific value of 3700-4000 kcal/kg, a density of 1.1 tons/cubic meter, and an ash content of less than 8%, demonstrating their distinct advantages over coal and oil.

3. Complete Combustion with Low Residual Ash

Wet Hay/Grass/Alfalfapellets retain their shape and consistency during combustion, remaining easy to burn. Due to high-pressure molding, the pellets have a high density, making them resistant to combustion and high temperatures. Combined with proper air distribution and ample oxygen supply, secondary combustion is possible, resulting in zero pollution and high fuel efficiency. Compared to coal, they produce less residual ash, which can be directly returned to the fields as potash fertilizer, making them an ideal clean energy source.

4. Clean and Environmentally Friendly

Using Wet Hay/Grass/Alfalfa pellet fuel is clean and environmentally friendly, with minimal pollution. When Hay/Grass/Alfalfa pellet fuel burns, the dust concentration is less than 40 grams per cubic meter, and sulfur dioxide emissions are 1/15 that of coal and 1/7 that of oil. Therefore, using Hay/Grass/Alfalfa pellet fuel is an effective way to improve air quality and prevent the greenhouse effect.

5. Convenient Transportation and Storage

Furthermore, Hay/Grass/Alfalfa pellet fuel is convenient to transport and store. Because the volume of Wet Hay/Grass/Alfalfa pellets is compressed by nearly nine times after being made into pellets, they are easy to transport and store, significantly reducing storage and transportation costs. Wet Hay/Grass/Alfalfa pellet fuel is resistant to mold growth in summer, is flame-retardant, and easy to store for long periods, making it suitable as a reserve fuel for disaster prevention and mitigation.

In summary, Wet Hay/Grass/Alfalfa pellet fuel is a fuel that burns efficiently, is easy to store and transport, and can be sustainably utilized. In the future, pellet fuel will see wider application and promotion in the fields of energy production and environmental protection.

9.图片

绿色地球+原材料+颗粒图

10.图片

11.图片

公司介绍图

Related Products

Leave Your Message

Email
WhatsApp