1.图片

Project Brief Introduction:

1.Product:Wet Hay/Grass/Alfalfa Pellet Line

2.Capacity:0.8-1.2 Ton /Hour

3.TONY Brand 0.8-1.2 Ton /Hour Wet Hay/Grass/Alfalfa Pellet Line Project Process

4.Main Machine: Straw Cutter,Hammer Mill,Rotary Drum Dryer,TONY Pellet Machine TYJ450-Ⅱ-55KW,Pellets Cooler,Packing Machine And Belt Conveyors

5.Total Power: About 180 kw

6.Need Area: About  ㎡  L: M  W: M  H: M

Project Layout For Customer:

3D图3

原材料图+颗粒机图片

1. The working principle of wet hay/grass/alfalfa biomass pellet processing equipment

The core equipment for processing wet hay/grass/alfalfa into biomass pellets is the ring die pellet mill. Its working principle involves mechanical transmission causing relative movement between the die and pressure rollers, forcing pre-treated wet hay (which needs to be crushed to a suitable particle size) through the die holes to form cylindrical pellets. This process requires no additional heating and utilizes the inherent fiber bonding properties of the material to form the pellets.

2. Characteristics of wet hay/grass/alfalfa biomass pellet processing equipment

(1) Modular design: The pretreatment, pelletizing, and post-treatment stages can be flexibly combined according to raw material moisture fluctuations and production requirements (typically 1/h-5t/h), adapting to different production scales.

(2) Intelligent control system: It can monitor key parameters such as raw material moisture, drying temperature, pelletizing pressure, and pellet temperature in real time, automatically adjusting the equipment's operating status (e.g., adjusting the dryer's hot air volume and the pelletizer's feeding speed) to address the problem of unstable raw material moisture and ensure consistent finished product quality.

(3) Cost-saving: It can directly process freshly harvested wet alfalfa, reducing spoilage during raw material storage.

(4) Wear-resistant and anti-sticking pellet mill: Core components (ring die, pressure roller) are made of high-hardness alloy material (such as 40CrNiMoA), with nitriding or spraying treatment on the surface to improve wear resistance and anti-sticking ability, coping with the high friction and high load conditions during wet material extrusion.

3. Application scenarios of wet hay/grass/alfalfa biomass pellet processing equipment

Equipment for processing hay/grass/alfalfa into biomass pellets is mainly used in animal husbandry (feed production) and new energy fields (fuel production), with a focus on areas with developed agriculture and animal husbandry and markets with demand for new energy.

2.图片

TONY Brand 0.8-1.2 TPH Wet Hay/Grass/Alfalfa Line can process wet grass and various biomass materials related to agricultural waste into biomass pellets. Grass processing into biomass pellets has a wide range of uses .As fuel: grass pellet fuel can be used as boiler fuel for power plants, industrial boilers, civil heating and other fields. Its calorific value is similar to coal, but the price is lower, and the combustion process produces fewer pollutants, is a more environmentally friendly fuel. As feed: grass pellets processed by grass pellet machine can be used as feed for livestock. This method can make full use of grass, reduce feed costs, and also help solve the problem of grass disposal. These uses can not only effectively use agricultural waste, reduce environmental pollution, but also create economic benefits and promote sustainable agricultural development.

1. Capacity: 0.8-1.2 Ton/Hour

2. Raw materials: Wet Hay/Grass/Alfalfa

3. Moisture: About 30-35%

4. Application: All kinds of  biomass materials suitable for pellet production.

Suitable customers: Green energy companies, agricultural cooperatives, and small - scale rural processing units that have ready access to wet grass and related agricultural residues.

5. Finished Pellets Markets: Large power plants, domestic heating systems in rural and suburban areas, industrial heating facilities in rural - based industries, combustion heat applications in local manufacturing units, heating systems in rural schools and community centers, boiler rooms in small - scale rural enterprises, and canteens in rural educational institutions.,farms, feed mills.

3.图片

图片

原材料--成品图

1. Project Name: Wet Hay/Grass/Alfalfa Production Line

2. Raw Material: Bales of Wet Hay/Grass/Alfalfa

3. Moisture Content of Raw Material: 30-35%

4. Capacity: 0.8-1.2 TPH

5. Process: Grinding Process - Fine Crushing Process - Drying Process-Pelletizing Process - Cooling Process - Packing Process

6. Main Equipment: Straw Cutter -TPX80-22kw, Multifunctional Hammer Mill- TFQ65*55-37kw, Rotary Drum Dryer-1.2*12m ,TONY Pellet Machine-TYJ450-II-55kw, Galvanized Pellets Cooler, Semi-automatic Packing Machine and Belt Conveyors

4.图片

流程图1

流程图.

5.图片

原材料+颗粒图

颗粒+机器图

3D图 图1-长宽

3D图  图2-高

3D图  图3

5.1图片

TPX80-22kw旋切机图

带原材料-成品图

1.Grinding Process：

A.The process is mainly used to grind wet hay/grass/alfalfa within 1.5m in diameter into wet hay/grass/alfalfa pieces. The rotary cutting mode of the outer chain of the gear, the rotary cutting rotor blade is sharp, and the blade types are various, which can be rotated to cut various bales of grass with different diameters, different thicknesses, different lengths and different water contents

B.TONY brand straw cutter TPX80-22kw models *1set

C.Capacity:0.8-1.5 ton/hour/set

Main Parts:

(1)Tony's New Straw Cutter

(2)Enlarged Turntable

(3)Rotary Cutting System

(4)Drive system

(5)Electrical Cabinet.

5.2图片

多功能粉碎机

带锯末图

2.Fine Crushing Process：

A. The process is mainly used to crush 60-70mm wet hay/grass/alfalfa pieces into 8-14mm wet hay/grass/alfalfa dust.

B.TONY brand multifunctional hammer mill TFQ65*55-37kw *1set.

C.Capacity: 0.8-1.2 tons/hour.

Main parts:

(1)TONY Multifunctional Hammer Mill

(2)Galvanized Dust Collector.

(3)Sawdust Conveying Fan.

(4)Cyclone With Airlock.

(5)Electrical Cabinet.

5.3图片

图片

3.Drying Process: 

A.This process is mainly used to dry the hay/grass/alfalfa dust from 30-35% to 10-15%.  

B.Capacity: 0.8-1.2 tons/hour.

C.TONY use 1set of 1.2*12m rotary drum dryer for this process,TONY hot stove is made of firebrick pan, shell with H steel plate as the frame.   There are 3 layers of fire blocking device inside, which can effectively prevent the fire from entering the tumble dryer.Customers can choose to use waste wood, biomass pellets, natural gas, etc. as fuel for the hot air furnace

TONY dryer use spiral tube material, and is not easy to deform.Unlike other manufacturers with iron plate splicing welding, very easy to deformation.

Main Parts: 

(1)TONY's Rotary Drum Dryer Main Body.(Reducers With Motors and Pips)

(2)TONY's  Hot Stove.

(3)Fan Blower+Cyclone With Airlock.

5.4图片

颗粒机四件套带 原材料，颗粒图

4.Pelletizing Process:

A.This process is mainly used to products pellets with φ6-8mm.

B.TONY brand vertical ring die pellet machine TYJ450-Ⅱ-55kw *1set

C. Capacity:0.8-1.2 tons/hour.

Main Parts:

(1)TONY New Vertical Ring Die Pellet Machine.

(2)Cyclone And Bags Dust Collectors.

(3)Bearings Automatic Lubrication System.

(4)Electrical Cabinets.

For more equipment details and information, you can contact TONY

5.5图片

镀锌冷却机+颗粒图

5.Cooling Process:

A.This process is mainly used to cool pellets from 80-90℃ to 20-30℃

B.TONY brand galvanized pellets cooler*1set

C.Capacity:0.8-1.2 tons/hour.

Main Parts:                                                                                                                                   

(1) TONY's new Galvanized Pellets Cooler Separator With Vibrating Screen.

(2) Cyclone and bags dust collectors.  

(3) Fan Blower.

(4) Connect Pipes.

5.6图片

半自动包装机

6. Packing Process:

A.This process is mainly used to pack pellets into 15-50KG/Bags. 

B.TONY brand semi-automatic packing machine* 1set.

C.Capacity:0.8-1.2 tons/hour.

Main Parts: 

(1)TONY's New Semi-Automatic Packing Machine. 

(2)Sew Machine, buyer Can Also Chose Hot Seal Machine For Chosen,To Confirm With TONY For The Price Difference. 

(3)Bags Transportation Conveyors.

(4)Feeding Inlet Silo.

(5)Electrical Cabinets.

6.图片

客户生产案例图

7.图片

图 湿草捆+颗粒 颗粒机

Economic and Social Benefits of  Wet Hay/Alfalfa/Grass Biomass Pellet Processing Projects:

1. Flexible Investment Threshold: 

Production capacity can be selected based on capital scale. Small-scale projects can use simple equipment such as a single pellet mill, requiring minimal investment to start. Large-scale projects can utilize multiple ring die pellet mills to improve efficiency, adapting to the needs of different entrepreneurs.

2. Local Employment Promotion: 

The project involves raw material procurement, field harvesting, and factory processing, providing seasonal or long-term jobs in rural areas and contributing to local economic development.

3. Extendable Industrial Chain:

 In addition to energy pellets, high value-added directions can be explored, such as using alfalfa pellets in livestock feed (requiring process adjustments) or extracting effective components from grasses to expand profit margins.

8.图片

草图加颗粒图

1. Stable Combustion Performance: 

Grass pellets typically have a calorific value of 14-17 MJ/kg, lower than wood pellets but higher than ordinary straw pellets. They burn with a stable flame and strong afterburning properties, and are less prone to charring, making them suitable for home heating, small-scale factory production, and greenhouse heating.

2. Flexible Product Attributes: 

The calorific value can be fine-tuned by adjusting the raw material ratio (e.g., mixing different types of grasses) to meet the different calorific needs of customers. Some processes can also retain the protein components in the grasses, expanding the product into supplementary feed for livestock and increasing its added value.

3. Suitable for Small-Scale Production: 

The processing flow does not require complex equipment. Small-scale production can be started with only basic equipment such as crushers and pellet mills, making it suitable for rural entrepreneurs or small and medium-sized enterprises.

9.图片

绿色地球+原材料+颗粒图

10.图片

11.图片

公司展会图