Biomass Hot Stove_Drying Equipment_Products

TONY Biomass Hot Stove is a heating equipment, which is composed of a burner, a hot blast stove body, an air intake port, an exhaust port, etc. It produces dry and clean hot air by burning the material. And the hot air is transported to the drying equipment to dry the material with high humidity.

TONY Biomass Hot Stove is made of firebrick pan, three channels, good fire insulation effect, weight 18 tons. Dimensions 4.2m*2.5m*2.2m

As the heating source of the dryer, TONY Biomass Hot Stove is an important component of the dryer. At present, hot blast stove is mainly fueled by coal, and its exhaust emissions have great social problems, so it is urgent to seek new forms of energy.

The fuel used in TONY Biomass Hot Stove is mainly biomass waste such as wood chips, peel and straw. After professional crushing, crushing, drying, molding into granular combustion, and then heated by hot blast furnace. The technology used in biomass hot blast stove has obvious advantages in energy reuse

TONY Biomass Hot Stoveis composed of burner, hot blast furnace body, air intake port, exhaust port and other components.

Biomass combustion furnace using pipeline air, biomass particles, bark, branches, wood or coal can be used as fuel, heating speed, easy to start and stop, no pressure, low cost, compared with the traditional way, investment savings of more than 40%, maintenance costs reduced by more than 50%, energy savings of more than 25%.

The total heat generated by the combustion of fuel in TONY Biomass Hot Stove is called the input heat. Some heat is lost in the process of combustion and heat exchange, and the lost heat is called lost heat. The heat loss mainly includes heat dissipation loss, incomplete combustion loss, smoke exhaust loss, ash heat loss and so on. The remainder can provide the effective heat used as a heat source, which is called the output heat of the hot blast stove. Thermal efficiency is used to measure how much of the energy produced by the combustion of biomass fuel into the hot blast stove can be used to convert into hot air. According to the principle of heat balance (input heat = output heat + lost heat), the calculation method of thermal efficiency can be obtained: thermal efficiency = (output heat/input heat) ×100%.

The fan blows the cold air from the outside into the furnace to make the fuel burn fully, the smoke exhaust fan will discharge the low-temperature flue gas after heat exchange, and the induced draft fan will draw out the hot air generated in the heat exchanger as a heat source through its negative pressure. The induced draft fan generally has two adjustable tuyere for cold air inlet and hot air outlet, which are used to control the air volume of cold and hot air. The cold air inlet is connected with the outside world, and the hot air outlet is connected with the heat exchanger. When the hot air temperature in the induced draft fan is too high, the size of the cold air inlet can be adjusted to increase the amount of air inlet, and the size of the hot air outlet can be adjusted to control the amount of hot air entering the induced draft fan, thus controlling the temperature of the hot air. The hot air outlet is generally equipped with a temperature sensor to monitor the hot air temperature in real time.

1. TONY biomass hot blast stove uses biomass fuel to burn, which is processed by the "heat exchanger" to form hot air, and enters the drying equipment to dry or bake the materials.

2. Because the heating temperature of hot blast stove is very high, it is required to choose high temperature resistant materials

3. TONY biomass pellet hot blast furnace equipment does not have tempering and defiring phenomenon under micro-pressure operation

4. TONY biomass hot blast stove has the advantage of high thermal efficiency, long service life, low carbon environmental protection and high stability of one-click start-up

5. TONY biomass pellet hot blast stove has low operating cost and wide fuel source.

1. Used as a matching heat source for various drying equipment, widely used in agriculture, chemical industry, food, feed, fruit slag, compound fertilizer, marigold, alfalfa, medicine, paper and other industries, such as wood chip dryer, production of biomass particles, Corn dryer, wine grains (soybean residue, sugar residue, medicine residue) dryer, chicken manure (cow manure, pig manure, cow mattress material) dryer, sludge dryer, wood chips (straw, corn cob) dryer, sugar (salt) dryer, alfalfa grass (ginkgo leaf, marigold) dryer, fruit and vegetable dryer, organic fertilizer (inorganic fertilizer, biological bacterial fertilizer) dryer, ultrafine powder dryer and other matching heat source.

2. Used for heating of various industrial plants, such as machine workshops, textile factories, chemical plants, furniture factories and other heating; Public facilities heating, such as hotels, office buildings, hospitals, schools, swimming pools, gymnasiums, large shopping malls and other heating; Breeding and planting industry heating, such as livestock and poultry farms, vegetable greenhouses, flower greenhouses and other heating and coal mine ventilation.

1.The designed feeding device controls the feeding speed and uniformity, ensures the fuel supply and complete combustion degree of the hot blast stove, prevents the spontaneous combustion of the hopper fuel, and makes the strength more reliable.

2.The combustion chamber design adopts a new large-capacity furnace, which is conducive to the combustion of biomass fuel, full combustion and good combustion effect.

3.The designed mechanical grate combustion can improve the combustion effect and overcome various problems caused by fuel coking.

4.High thermal efficiency, low operating cost and significant energy saving effect.

5.The use of biomass fuel combustion, low emissions, energy saving and clean environmental protection.

6. Wide range of fuel adaptation, can be used for a variety of biomass pellets and molding fuel.

When installing a Biomass Hot Stove, the following points need to be considered:

1. The installation site should be kept dry and ventilated, and the entrance and exit should be smooth.

2. There should be no inflammable and explosive materials and other dangerous substances around the hot blast stove.

3. The interface of the hot blast stove should be securely connected and sealed, and installed in strict accordance with the operation manual

4. Electrical equipment needs to comply with electrical safety specifications, and the selection of wires should be reasonable

In order to extend the service life of hot blast stove and ensure safety, it is necessary to pay attention to the following points:

1. Check and maintain the hot blast stove regularly to ensure that it is in good condition. If it is damaged or worn, replace the parts in time.

2. After each operation, turn on the extinguishing device, turn off the power, and wait for the hot blast stove to cool down before carrying out maintenance, cleaning, maintenance and other operations.

The medium stored in the hot blast stove can be water vapor or other media, and it should be thoroughly 3 before replacing the medium. Clean the hot blast stove, otherwise it will lead to the mixing of the medium and affect the subsequent operation. Keep hot blast stove shell and accessory equipment clean, do not let hands touch the hot parts

TONY through a long time of continuous exploration ofbiomass hot blast stove, biomass hot blast stove production, use, research and development technology has matured. Domestic hot blast stove manufacturers fully realize the advantages of biomass hot blast stove, only the use of hot air as the carrier and medium can further improve the utilization rate of hot blast stove and work income. The traditional working mode of hot blast stove is to configure multiple fans in the process of hot air conveying, so that some direct hot blast stove can often only get the working effect of indirect hot blast stove, which obviously wastes a lot of resources in the combustion process. With the continuous development of the mechanization level of agricultural production and the continuous improvement of social and corporate awareness of environmental protection, biomass hot blast stoves will be used and promoted in a large area of dryers.

1.Savings In Fuel Choice Costs

After the use of biomass hot blast stove, you can use environmentally friendly biomass fuel, saving a lot of industrial energy, such as coal, oil and so on

2.Low Pollution And Emission Of Waste Gas

The use of biomass hot blast stove, compared with the ordinary hot blast stove less dust and a lot of pollution gases. Such as sulfur dioxide, hydrogen sulfide and other harmful gases, reduce the processing of exhaust equipment and operating costs, and can burn the gas generated by burning biomass fuel directly during operation, clean, pollution-free, combustion environment without black smoke and dust. The dust content of hot air can be controlled at a maximum of 30~120mg/Nm3. Reduce the environmental pollution of drying equipment in operation engineering.

3.High Thermal Efficiency Of Materials

Biomass hot blast furnace technology is advanced, so that the material combustion in the combustion chamber is fully burned, the use of biomass hot blast furnace, compared with ordinary coal-fired hot blast furnace, the heat source utilization rate can be increased from 78% to 94%, the fuel after combustion, reaction generated by high temperature combustion gas contact with the outside air, mixed to a certain temperature directly into the drying chamber, contact with the dried material. Heat and evaporate the water to produce a dry product. Greatly improve the efficiency of heat source utilization and save social energy.

4.More Intelligent

Overall optimization design, intelligent operation is simple and convenient, from the raw material to the slag all achieve mechanical intelligence, can automatically adjust the feed amount according to the requirements of wind temperature, only a simple training can get started, very suitable for the current production enterprise staffing, reduce workload, free labor.

5.Simple Structure Long Service Life Of Equipment

The equipment design of biomass hot blast furnace is reasonable and the structure is simple. It is sent into the combustion chamber by spiral, and the auxiliary air enters the air bin through the distribution chamber and then through the regulating valve, and then through the grate through the material layer. The fuel slag is sent out by the slag removal machine, and the high temperature flame enters the high temperature gas purification chamber, reducing the distance of the settling chamber of the hot blast stove by 1/3. Easy to install and transport, durable, rarely appear quality problems; The equipment is safe and runs without risk. The reasonable service life can reach more than 15 years.

6.Promoting The Development Of The Biomass Industry Chain

The use of biomass hot blast stove also lies in that it can effectively promote the development of energy agriculture and promote the development of socialist new rural construction. Large-scale cultivation of energy crops can develop and utilize idle desert land and saline-alkali land, which is conducive to the gradual improvement of these poor soil texture, more conducive to the adjustment of agricultural industrial structure, and can cultivate new farmers who are committed to the use of renewable energy. Not only that, it can absorb surplus rural labor, increase farmers' income, and farmers' income sources have become more diversified. Promote the healthy and steady development of the biomass industry chain.

1. Unmatched Quality - Our equipment has been designed and manufactured using the latest technology and top-quality materials. It undergoes rigorous testing to ensure that it meets industry standards and is reliable, durable, and high-performing.

2. Cutting-Edge Technology - We constantly update our equipment with the latest technological advancements to stay ahead of the competition. This means that you'll be using the most modern and efficient machinery that will give you an edge and save you time and money.

3. Affordability - Our equipment is competitively priced, making it accessible to all customers. We understand that investing in machinery can be a considerable expense, and we want to make sure that you get the best value for your money.

4. Excellent Customer Service - We pride ourselves on providing excellent customer service, and our products come with comprehensive after-sales support. Whether you're a new customer or a long-time partner, we will always go the extra mile to ensure your satisfaction.

5. Versatility - Our equipment is designed to be versatile, reliable, and adaptable to different industries and environments. Whether you need machinery for agriculture, construction or any other industry, our product range will meet your needs.In conclusion, choosing our company's equipment means that you will get the best quality, affordability, and customer service that will enable you to achieve your business goals.