Pellets Burner is a biomass high temperature cracking burner that uses wood chips, wood powder, rice husks, straw and other biomass particles as fuel. It is a new type of information equipment with low combustion cost and no pollution.The burner converts the open flame directly into high-temperature hot air flow through the fire cylinder, which enters the cylinder for drying. TONY Pellets Burner adopts boiling semi-gasification combustion and tangential swirl air distribution design, which makes the fuel burn completely and the combustion efficiency can reach more than 90%. TONY Pellets uses biomass pellets as fuel to achieve sustainable energy use. The use of low-temperature segmented combustion technology, the flue gas nitrogen oxides, sulfur dioxide, dust and other emissions are low, is the best substitute for coal furnace TONY Pellets Burner is suitable for a variety of thermal energy industries, such as drying equipment, drying equipment, aluminum processing, aluminum die casting, aluminum melting furnaces, incinerators, etc.

Working principle of biomass pellet burner: Biomass pellet burner is a semi-gasification automatic intelligent operation burner equipment that uses renewable biomass pellets as fuel. Its principle: biomass pellet fuel enters the continuous high-temperature gasification chamber for cracking through the automatic feeding operation system. After cracking, sensible heat and intermediate products such as H2, CnHm, Co, CH4 and other large amounts of high-temperature biomass gas components are generated. The air distribution operation system is supplied from the bottom of the furnace. The biomass gas components directly enter the high-temperature combustion chamber with sufficient oxygen in the air through the biomass gas nozzle for full combustion, releasing latent heat.

1.Energy efficient, high thermal efficiency. Double conversion with automatic feeding and optimal control of the wind makes small fuel consumption and power is, protective layer may be secondary hot water reuse which will save cost for30-80% than fuel oil burner.

2.Smart two-stage combustion fire size, fuel vaporization speed is faster, burner temperature is above 1000 degrees with more than 98% burnout rate.

3.Using state advocates of renewable biomass as fuel, non-smoking, flame crystallization, less ash and meets the request of soot emissions.

4.Reliable, fast return on investment. Gasification combustion chamber temperature, high temperature resistant materials whose working life will be longer than market similar products.

5.Simple operation, easy maintenance, intelligent operating control for feeding, temperature and pressure.Burner assembly design.

1. Because our gasification chamber is made of unique high-temperature resistant materials, it can ensure that the gasification chamber can be used at high temperature for a long time.So no water is needed to cool the gasification chamber.Reduce heat loss.Therefore, the thermal efficiency is greatly improved.And the liner is a one-time pouring molding, no seams, so that the heat loss to minimize.In addition, the heat preservation effect of combustion machine is very good, and greatly reduce the heat loss.

2. Unique boiling semi-gasification combustion mode makes fuel combustion more complete.More quickly.

 our company follows the principle of thermal energy design, and can completely reach or exceed the rated heat production of the equipment in the combustion design and production.The output.

3. High degree of automation: the automatic control panel developed by our company enables the biomass combustion machine to operate with one key, which is convenient and does not require special care.The combustion engine size conversion function can meet the user's different fire demand.And no safety hazards, low failure rate, good stability.

1. Biomass pellet fuel enters the burner furnace through the automatic feeding system

2. Biomass pellets in the furnace are ignited by the electronic igniter

3. Pellets are semi-gasified and burned in the furnace, causing the furnace temperature to rise

4. Under high temperature conditions in the furnace, high-temperature combustion gas is produced by cracking, generally containing hydrogen, methane, hydrocarbons, carbon monoxide, etc.

5. High-temperature combustion gas enters the supporting heating equipment through the burner with secondary oxygen distribution

1.Lower fuel consumption.

2.Lower power consumption.

3.Lower heat losses.

4.Boilers are completely trimmed, packaged boilers. No additional fuel train items or electrical wiring is needed.

5.Located in the upper ring has large-capacity boiler steam room, pot and underwater soft drinks separation measures, ensure the availability of high quality steam.

Applicable to coating production lines, electroplating ovens, boilers, small power station boilers, industrial kilns, incinerators, smelting furnaces, die-casting machines, drying equipment, kitchen equipment, drying equipment, food drying equipment, ironing equipment, paint baking equipment, road construction machinery and equipment, industrial annealing furnaces, large-scale tonnage boilers burning oil, gas and coal, asphalt heating equipment and other thermal energy industries.

1. Wide Sources Of Fuel Agricultural and forest wastes can be used as raw materials, preferably biomass pellets. 2. High Efficiency And Energy-Saving Flame temperature up to 1100ºC, low use cost and 30-60% lower operating cost than fuel oil (gas). 3. Stable And Reliable With anti-backfire device, the inner liner is made of high temperature resistant material, with long service life. 4. Low Carbon And Environmental Protection No visible smoke and dust emission, low sulfur and nitrogen emissions, zero carbon dioxide emissions. 5. Simple Operation Automatic feeding, simple operation, small workload.

The selection of a pellet Burner is a multi-factorial decision-making process that takes into account the performance, scope of application, cost effectiveness and ease of operation and maintenance of the equipment. Here are some key points about the selection of Pellets Burner:

Fuel Type And Quality:

Wood pellet biomass fuel is mainly used in Pellets Burner, it is recommended to use 6-8mm pure wood pellet biomass pellets to avoid using pellet pellets and magazines too much pellet fuel.

Operation Cost And Efficiency:

the structural design rationality and operation cost of the equipment should be considered when selecting, so as to ensure the economy of long-term use.

Easy Operation And Maintenance:

The equipment should have automatic feeding, wind ash removal and other functions, simple operation, easy maintenance.

When choosing the model and parameters of the burner, you need to consider the following core factors: application field, fuel type, heat load demand, combustion efficiency and environmental protection requirements, control system and automation level, installation and maintenance convenience, and brand and after-sales service. ‌ By comprehensively evaluating these factors, you can ensure that you choose the burner that best suits your needs and ensure the efficient, stable and environmentally friendly operation of the equipment.‌

24 Hours Online Service. -Inquiry will be replied within 2 hours. -All-the-way tracking service offered from placing order to delivery. -Free training for operation, debugging and daily maintenance. -We can provide professional guide installation. -One year warranty and all-round after-sales service. -Customized design and flow chart are available for our clients. -Independent R&D team and strict & scientific management system