 |
Environmental requirements prohibit the use of coal, and many enterprises can only use liquefied petroleum gas or diesel as a temporary replacement, resulting in energy consumption costs of energy enterprises.There is a large stock of biomass wood chip fuel on the market, and TONY took the lead in developing a biomass Wood Chips Burner in this context, and achieved success. There is no essential difference between biomass wood chip fuel and biomass molding fuel, which makes the legal use of biomass wood chip fuel have environmental protection policy basis. TONY Wood Chips Burner is mainly used in oil-gas boiler supporting and energy-saving transformation, coal boiler environmental protection transformation, drying line supporting heating, kiln heating and so on. Under the same conditions, the fuel cost of using a wood chip burner to burn wood chips is 75% less than electricity, 70% less than fuel oil, 60% less than natural gas, and about 50% less than liquefied gas. TONY Wood Chips Burner can directly replace the original gas burner and biomass pellet burner. It has the characteristics of energy saving, environmental protection, safety and stability, simple operation and so on,and further save fuel costs after replacement. At present, the sales volume on the market is very large and the application is very wide. |
The working process ofthe biomass chip burner is as follows:
1. Wood chips, pressing blocks, biomass particles and other fuels through the automatic feeding system into the burner furnace
2. The fuel in the furnace is ignited by an electronic igniter
3. The fuel in the furnace semi-gasification combustion, making the furnace temperature rise
4. The furnace pyrolysis under high temperature to produce high temperature gas, generally including hydrogen, methane, hydrocarbons, carbon monoxide and so on
5.High temperature gas through the fire nozzle with secondary oxygen distribution into the matching heating equipment
 |
TONY Wood Chips Burner, as the name suggests, is a combustion equipment that burns biomass chips, wood blocks, wood chips, pressing blocks and other fuels. The fuel uses low temperature semi-gasification combustion in the furnace, converts the open fire directly through the fire cylinder into high temperature hot gas flow, and enters the inside of the cylinder for drying. TONY Wood Chips Burner uses a low-temperature semi-gasification combustion method, low temperature combustion in the furnace, the general combustion temperature of 600-800 ℃, the secondary fan is configured in the nozzle, the flame temperature of the nozzle is as high as 1300℃ under normal working conditions, which can meet the needs of various work. TONY Wood Chips Burnercan burn biomass wood chips, biomass particles, biomass compactor and other fuel types |
|
TONY Wood Chips Burner Type Models |
||||||
|
NO |
Model |
Thermal output |
Power |
Material storage |
Full load required materials |
Weight |
|
1 |
TJHJ-30-FL |
300,000 |
0.75 |
125 |
65 |
400 |
|
2 |
TJHJ-45-FL |
450,000 |
1.0 |
160 |
100 |
700 |
|
3 |
TJHJ-60-FL |
600,000 |
1.5 |
300 |
135 |
1000 |
|
4 |
TJHJ-120-SL |
1,200,000 |
3.0 |
500 |
260 |
3000 |
|
5 |
TJHJ-240-SL |
2,400,000 |
5.5 |
1000 |
530 |
4500 |
|
6 |
TJHJ-360-SL |
3,600,000 |
7.5 |
1500 |
800 |
6000 |
|
7 |
TJHJ-480-SL |
4,800,000 |
9.0 |
2000 |
1060 |
7500 |
|
8 |
TJHJ-600-SL |
6,000,000 |
11.0 |
2600 |
1350 |
9000 |
|
9 |
TJHJ-720-SL |
7,200,000 |
15.0 |
3000 |
1700 |
12000 |
1. Environmental Protection And Pollution-Free: The chip burner uses semi-gasification combustion, the chip fuel is convenient to use, the waste is utilized, the SO2 in the flue gas after combustion is close to zero emission, NOX, dust, etc., after flue gas treatment, to meet the emission standards of biomass fuel.
2. Gasification Combustion: The use of low-temperature semi-gasification combustion mode, low-temperature combustion in the furnace, the general combustion temperature of 600-800 ℃, the nozzle is configured with secondary fans, the normal operation of the nozzle of the flame temperature up to 1300℃, can meet the needs of various work.
3.A Variety Of Fuel Adaptation: Can burn biomass wood chips, biomass particles, biomass blocks and other fuel types, the fuel humidity should be controlled at about 20%, the size of the fuel is generally not more than 200mm, the maximum thickness is controlled within 50mm.
4. A Wide Range Of Equipment Applications: The chip burner can be equipped with gas boilers, roller drying lines, hot blast furnaces, furnaces, melting furnaces, annealing furnaces, incinerators, aluminum rod heating furnaces and other equipment, and can be used to transform coal-fired boilers, so that the flue gas emissions of coal-fired boilers meet the standards.
5.The Energy Saving Effect Is Obvious: Because the cost of wood chip fuel is about 50% of biomass pellet fuel, so the wood chip burner is more than other burners to reduce the cost of energy consumption, has been close to or even lower than the cost of coal, is currently the most economical energy.
6. National Policies To Support And Encourage: To replace coal, oil, liquefied gas and other fuels to reduce pollutant emissions, in line with standards
|
TONY Wood Chips Burnerhas a variety of models, according to the customer production of different models, Wood Chips Burner factory price is not the same. You get what you pay for. The price always depends on the value. Because the pellet machine market is currently more chaotic, customers must be careful to buy! To make a purchase decision after a comprehensive inspection of a number of comprehensive indicators such as product quality, manufacturer scale strength, pre-sales and after-sales service ability, research and development design ability, rather than just looking at the price! Please note: if your purchase cost is very low, the later use cost will be very high! Because the purchase of very low cost equipment is likely to cause you to face endless maintenance later, continuous downtime and maintenance will delay your production and make you pay more money. |
 |
TONY Wood Chips has a wide range of applications: Biomass burner is suitable for coating line, electroplating factory ovens, boilers, small power station boilers, industrial kilns, incinerators, melting furnaces, die-casting machines, drying equipment, kitchen equipment, drying equipment, food drying equipment, ironing equipment, painting equipment, highway construction machinery and equipment, industrial annealing furnace, oil, gas, coal large tonnage boilers, Asphalt heating equipment and other thermal energy industries.
Usually used in aluminum, copper rod heating furnace, boiler, all kinds of electroplating factory, copper wire drawing, forging, die casting machine, spraying, industrial annealing, drying hotel, hot water furnace, clothing, bleaching and dyeing equipment and other heating equipment supporting and energy-saving transformation. Tony equipment products from the design, development, sales, and after-sales service are equipped with professional and technical personnel tracking service. Now has a strong production capacity, and constantly develop to adapt to the market and meet customer needs of a variety of new products, in the fierce market competition to stand out in the same industry advantages, in the domestic peers can be called a larger scale, complete functions, advanced equipment, service in place
 |
1. Process upgrade, durable. The combustion chamber and nozzle are cast with refractory and high temperature resistant material, without coking and slag formation. 2. Clean combustion, low-carbon environmental protection, the use of renewable biomass advocated by the state as fuel, smokeless, flame crystallization, less ash, in line with the requirements of soot emissions. 3. Reasonable and compact structure, small footprint, fire assembly design, simple installation 4. Simple and convenient installation, low operating cost, stable and reliable, fast investment recovery, low temperature combustion in gasification chamber, 2-3 times longer than similar products in the market. Supporting and renovation investment is small, short payback period. 5. High energy saving, high thermal efficiency. Double frequency feed and automatic air distribution optimization control, so that fuel consumption and power is small, the protective layer of hot water can be reused twice, compared with the fuel burner can save 30%-80% operating costs. 2, the size of the fire two-stage intelligent combustion, fuel gasification speed, the flame temperature of more than 1000 degrees, burning rate of more than 98%. 6. Touch screen one-click operation, fully sealed variable frequency speed feeding, automatic ignition, automatic temperature control, size fire automatic conversion. Simple operation, no manual adjustment, small workload. |
|
1.TONY believes in the power of integrity. Welcome to visit our factory 2.TONY has excellent product quality, good quality, reliable and guaranteed 3.TONY stock is large, the supply is sufficient, let you save worry and effort 4.TONY delivery is guaranteed and can update the logistics status in real time, so that you can rest assured 5.TONY has a strong design and R & D team, and the products can be customized according to the actual production needs of customers 6.TONY has perfect after-sales service, you can contact us at any time when you have any needs |
|
If you are interested in TONY Wood Chips Burner ,please send us inquiry freely.
1. About the price: there are many kinds of equipment, different models, and different prices
2. Before the quotation, you need to make clear what your raw materials are, what kind of finished products you want, and how much output you want
3. When we know your specific situation, we will match you with the right machine and then quote you a price
4. Price is only one of the factors for you to buy equipment, I sincerely hope that you can visit the field and know more about us.
2024 Tony Machinery - All Rights Reserved. Map
