The higher thepellet  forming rate, the higher the pass rate and the more profits it can create. Therefore, when users use wood pellet machines, they pursue their high forming rate. So how to ensure the forming rate of wood chip pelletizer? Here is Shandong TONY to introduce it to you:

1. Try to use soft wood chip raw materials to makepellet s. Many softer wood chips are easier to press and can effectively improve the molding rate.

2. The best raw material for pressing wood chippellet s is between 15% and 20%. If the moisture is too high, the pressedpellet s will be loose and easily dissipated during packaging and transportation. If the moisture is too low, it will make it difficult to press thepellet s, thepellet  forming rate is low, and there are too many powdered materials.

Therefore, it is recommended that you reduce the moisture of the material by drying or drying, and increase the moisture of the material by adding moisture. During the molding process of wood chip pellets, the increase in thepellet  forming rate can save a large amount of raw materials, reduce production costs, and increase user profits. At the same time, the operation procedures must be strictly followed during operation to reduce errors.