TONY Sawdust Chipper is a kind of equipment that can process logs and small diameter wood into 5-15mm wood chips, compared with wood shredder, the number of blades of wood shredder is more, so the broken material is finer, and can be directly used to make biomass pellets after screening, eliminating the fine powder section. More efficient, more energy efficient. TONY Sawdust Chipper is widely used in paper making, power plant, boiler, wood fiber board, medium density board, particle board and other fields. Because main raw materials used by TONY Sawdust Chipper are waste wood or crop waste, it protects the environment well and realizes the sustainable use of resources, which is a green and environmentally friendly equipment

TONY Sawdust  Chipper and wood chip machine components are similar, mainly by the feed belt, discharge belt, machine base, knife roller, feed mechanism, hydraulic buffer system and electrical control system. In addition, there are auxiliary parts such as motors, oil pumps, protective covers, blades, screens, etc., but more blades are used for sawdust shredders, and the design structure of sawdust machines is reasonable and can be customized according to customer needs.

       TONY Sawdust  Chipper can slice small diameter logs, waste wood, branches, straw, bamboo, straw, furniture waste, etc.

Depending on the use of the customer, the same raw material with different machines to produce the finished product is not the same, from the picture we can clearly see that the finished product of the chip machine is a piece of small wood chips, and some sawdust crusher production of sawdust.

Finished products, the use of a wide range, such as the production of charcoal, biomass particles as fuel, can be used to fill pet homes, become clean and sanitary, can also be used for paper mills as paper raw materials, can also be used for furniture factories to make compression plates and so on.

Motor Driven: The sawdust chipper is powered by a motor that drives a rotor with a blade or hammer inside the machine to rotate at high speed, which is the energy source for the entire crushing process.

Feed And Preliminary Crushing: The material to be crushed (such as wood, wood chips, branches, etc.) is uniformly sent to the crushing chamber through the feed port. The inlet design takes into account the size and shape of the material to ensure that the material can enter smoothly and begin to break upon contact with the blade or hammer.

Cutting, Tearing And Impact: In the crushing room, the high-speed rotating blade or hammer cuts, tears and impacts the material, so that the material is gradually broken into smaller particles. At the same time, the centrifugal force generated by the rotation of the rotor makes the materials collide with each other in the crushing chamber, further improving the crushing effect.

Air Flow Assistance: The air flow generated when the rotor rotates will make the material rotate with the direction of the blade, increase the collision frequency between the materials and improve the crushing efficiency.

Screen Screening And Discharge: the crushed material is screened through the screen, the qualified small material is discharged through the screen hole, and the larger material is left in the crushing room to be broken again, so as to ensure the consistency of the discharge particle size

1. The processed wood chips have uniform length, smooth incision and uniform thickness, which is very beautiful. 2. According to the different thickness of the raw material to be cut, with the help of the hydraulic system, the upper feed roller assembly can be lifted and lowered within a certain range. 3. The discharge port is equipped with a durable alloy steel screen. Qualified cutting material falls from the screen hole and is discharged from the bottom through the discharge belt conveyor. Excessive material will be cut again. 4. The blade is very convenient to replace and easy to maintain. 5. Structure temperature, high production capacity, low processing cost. 6.The machine makes these waste wood have the value of recycling and reuse, and is a good equipment for recycling waste into treasure resources.

We provide some free spare parts, such as blades, belts, washers and other small parts, because blades, hammer, bearings and other important wear parts, we recommend customers to buy some appropriate to save freight, we have enough spare parts, now in stock.

1. Determine The Size Of The Finished Product You Want.

When choosing a sawdust crusher, it is necessary to determine the size and fineness of the material broken when you use it. Generally, the fineness of the crusher is higher, and the product performance is better. When choosing a sawdust crusher, the staff can test the fineness of the sawdust produced by the crusher on site, compare the equipment, and choose a sawdust crusher that suits their requirements

2. Determine The Capacity You Want

According to the number of materials that need to be crushed every day, it is good to determine what kind of output of sawdust crusher to choose, and refuse to use large materials or small materials.

3. Try On-Site Test

In the case of conditions, you can prepare certain materials to the factory for field tests to see the test machine.

4. Noise Level

The traditional sawdust mill will produce a large noise during the working process, which disturbs the working environment of the entire factory. It will also endanger the health of the staff and affect the efficiency of the work. Therefore, the first criterion for purchasing sawdust shredders is the size of noise.

5. Sawdust Chipper Power Consumption

Sawdust mill is mainly driven by motor, choose a low consumption and high energy efficiency sawdust mill, can save a lot of production costs for the industry, increase profits.

1.Extended Inlet  The design of the feed port is horizontal design, stable operation, can crush less than 35cm branches, scraps, waste templates, corn stalks, corn cobs, wheatgrass, straw, etc. 2. Customizable Screen It can choose different specifications of screen according to customer requirements, the smaller the screen aperture, the finer the finished sawdust 3. Wide Usage  The pulverized sawdust is widely used, which can be used as biomass particles, organic fertilizer, nutrient soil, density board and so on. 4. Highly Cost Effective  With low threshold investment, high productivity, good economic benefits, easy to use and maintain. 5. Quality Assurance TONY Sawdust Chipper is made of high quality material and durable. 6.More Energy-efficient  Tony uses energy efficient motors, which can effectively reduce energy consumption by 25%.

1. About the price: there are many kinds of equipment, different models, and different prices

2. Before the quotation, you need to make clear what your raw materials are, what kind of finished products you want, and how much output you want

3. When we know your specific situation, we will match you with the right machine and then quote you a price

4. Price is only one of the factors for you to buy equipment, I sincerely hope that you can visit the field and know more about us

1.TECHNICAL GUIDANCE：

 According to your capacity and raw materials, recommend the right model; customized design and flow chart for customers

2.24 HOURS REPLY:

24 hours online service, you can contact us at any time.

3.FIELD VISIT：

Visit our factory for inspection and performance test

4.COMPETITIVE PRICE:

First-rate, attractive andreasonable price to earnrour reliance and followon orders

5.STRICT QUALITY INSPECTION

We have strict quality management system and quality inspection department, 1 year warranty (except wearing parts)

You may also have the following questions：

1.What's your advantage?

Honest business with competitive price and professional service on export process

2. How I believe you?

We consider honest as the life of our company, we can tell you the contact information of our someother clients for you to check our credit. your order andmoney will be well guaranteed.

3.Can you give warranty of your products?Yes, we extend a 100% satisfaction guarantee on all items. Please feel free to feedback immediately ifyou are not pleased with our quality or service.4.Where are you? Can I visit you?Sure,welcome to you visit our factory at any time.5.How about the delivery time?

Within 15-35 days after we confirm you requirement.

4.what kind of payment does your company support?

T/T, 100% L/C at sight, Cash, Western Union are all accepted if you have other payment,please contact me.

5.What if the machine is damaged?

One-year warranty and comprehensive after-sales service.After this period, we will charge alower fee to maintain after-sales service.

Shandong TONY Environmental Protection SCI-TECH CO., LTD. (formerly Zhangqiu TONY Machinery  Co., LTD.)  is located in the east of Jinan, the capital of Shandong Province, the west of Zibo, there are 309 National Road and Jiqing high-speed east-west through, west of Jinan International Airport, the traffic environment is very convenient, is an important production base of biomass new energy equipment. The company has brought together a group of outstanding scientific research, production and management talents, creating a united, efficient and strict team. At present, the company's product sales have covered nearly the world, including: Russia, Japan, South Korea, France, Germany, Italy, Romania, Bulgaria, Malaysia, Vietnam, Thailand, Singapore, Cambodia, Indonesia, Iceland and many other countries and regions, well received by domestic and foreign users. We promise to let customers get the maximum benefit with the lowest investment! TONY welcome customer from all over the world!