Wood Crusher_Wood Crushing Equipment_Products

TONY Wood Crusher is a forestry processing equipment that can process small diameter wood, branches, forks, logs, wood chips, etc. into wood chips in one step. The wood shredder mainly uses belt transmission and is composed of a motor, belt, feeding port, outlet, blade head, etc. The fineness of the sawdust can be adjusted by replacing the screen. Compared with similar products, the performance of this machine has been greatly improved.

TONY Wood Crusher can process raw materials such as pine, mixed wood, poplar, cypress, and bamboo. It is widely used in industries such as power plants, paper mills, particle production, and charcoal production lines. Due to its compact structure and small footprint, the shaving quality is good, the power consumption is low, and it is suitable for flow operation.

It is widely used in the feeding section of medium and small-sized particleboard and fiberboard production enterprises, and can also be used by individual entrepreneurs for the production of commodity wood chips.

Different varieties of wood the same screen hole hit out of the thickness effect is not the same, the same varieties of wood different dry humidity hit the thickness effect is not the same, the following crushing effect is for reference only, the screen hole aperture are millimeters (MM) as the unit, if there is not clear, please consult customer service!

TONY Wood Crusher adopts blade cutting and high-speed air impact, collision dual crushing function in one, and can complete the micro-material sorting processing process at the same time. In the cutting and crushing process of the blade, the rotor produces high-speed air flow, rotating with the cutting direction of the blade, the material accelerates in the air flow, and the repeated impact makes the material subject to double crushing at the same time, accelerating the crushing rate of the material.

After the crushed material enters the grinding chamber into the body, the material is coarsely crushed into the main surface of the grinding chamber by strong friction and shear during the mutual rotation movement of the high-speed rotating grinding disc and the side tooth plate, and then crushed while sifting. After reaching the required sifting, the material is discharged from the bottom, and the material that fails to meet the requirements continues to be crushed. There is a crushing effect in any movement of the main surface of the crushing chamber, not only the main surface of the material and the knife plate, but also any self-cutting and self-friction between the main tooth plate and the material can make the material crushed. In order to prevent ultra-fine and slight materials from causing eddy circulation in the crushing chamber, a fine powder stripping chamber is provided with a recovery cloth bag in the tangential direction of the crushing chamber. The pulverized material is discharged and collected through the screen gap under which the fineness is controlled.

TONY Wood Crusher Type Models
Model	Cutter diameter（mm）	Blades QTY (pc)	Blade length(mm)	Inlet diameter （mm）	Spindle speed (r/min)	Power(kw)	Capacity(kg/h)	Size LWH(mm)	Weight（kg）	Finished Chips Size:（mm）
TFP-400	400	4	90	160*180	2600	11	300-500	1100700950	450	According to customer requirements, Wood Crusher can be replaced with screens to adjust different particle sizes
TFP-600	600	4	150	200*220	2600	22	600-1200	15008001200	700
TFP-800	800	6	230	250*300	2000	30-37	1200-2500	210011001400	1100
TFP-1000	1000	6	260	300*400	2000	55+7.5	1800-3000	210012001600	1350

1. TONY Wood Crusheris made of high manganese steel, beautiful appearance, even if continuous high strength work, it is not easy to deform, long service life.

2. TONY Wood Crusheradopts a wider feed port design to make feeding more convenient.

3. The particle size of wood chips can be adjusted by replacing the screen;

4. Can install wheels, cyclones and other custom designs for customers

5. The whole equipment is driven by only one motor with low energy consumption and low noise

6. TONY Wood Crusher is small in size, low in price and high in output. It is a cost-effective equipment, widely used in small charcoal factories and feed processing industries

7. TONY Wood Crusher with fineness analyzer, is committed to light weight materials, fiber materials, brittle materials, toughness materials and other special difficult crushing of new pulverizing equipment.

8. The feed port adopts self-priming feeding to ensure safe production, replacing the shortcomings of the traditional mill direct feeding, accidentally putting metal blocks and seriously damaging the mill.

9. With fan, Shakron, dust collector equipment, the use effect is better, the work site is clean and tidy

1. Turn on the power and see if the steering is correct.

2. When the tool is installed, the knife edge extends out of the cutter head plane 2-4mm, and then tighten the bolt. If the pressure bolt thread is found to be worn, it should be replaced immediately to prevent loss of the slide cutter nut. The use of wood chip machine does not change the power and speed, sharpening Angle, maintain the original straight line 28-30 °.

3. Change the expansion of the knife, must be the same length of the extension knife.

4. By adjusting the length of the knife, when the particle can not reach the ideal, change the roll screen with different apertures. It is necessary to change the RO and adjust the tool at the same time, the ro hole is not less than 14mm (diameter), not more than 20mm (diameter), the tool length is between 3-6mm, and the gap between the bottom blade and the knife is not more than 1mm.

5. It is strictly prohibited to put the wood with stones and nails into the machine to prevent breaking the knife and internal parts.

6. Pay attention to check the hammer bolt, found loose, immediately tighten, hammer and bolt wear serious, should be replaced.

7. The sharpening Angle is straight 28-30 °, it is strictly prohibited to grind into convex surface, convex surface will lead to steel blade separation or local peel steel.

8. The frequently used machine should check whether the bearing butter is missing. Butter should be added once every 3-4 hours, and it is not easy to add too much butter.