More and more people are engaged in the biomass pellet fuel industry. Everyone has also understood and explored the usage cost, and the wear and tear of the ring die during the production process is also a major cost. Then, how to maintain and service it directly affects the service life of the ring die and also directly influences the processing cost of biomass pellets.
Although the sales of pellet fuel are booming now and the supply of pellets is insufficient, few customers will encounter the situation of not producing for a long time. However, prevention is the key. Let's still explain how to extend the service life of the ring die of the biomass pellet machine? Today, TONY Pellet Machine Manufacturer gives you the answer!
1.Before the equipment is shut down
After the processing of wood chips and straw pellets is completed, it is necessary to grind them with oil for a period of time to ensure that only oil remains in the die holes. This is of great benefit to the next day's work and also conducive to the long-term use of the ring die. The oil can be made by mixing waste engine oil and wood chips. It is produced once and can be recycled.
2.The ring die is not used for a long time
If the ring die has not been used for a month or even longer, it is recommended to clean the oil inside at this time. Therefore, during long-term storage, the oil will gradually harden, making it difficult to remove when it is used next time.
3. Storage Conditions
Most of the ring dies of biomass pellet machine are made of alloy steel. If they are kept in a damp place for a long time, the surface of the ring die may be damaged due to air corrosion, which will greatly reduce its service life. It is recommended to store in a dry environment.
4.the handling process should be carried out carefully
The ring die of the wood pellet machine is a high-precision accessory. The die holes are all carefully processed according to the compression ratio of the ring die. If the inner wall structure of the die holes is damaged due to carelessness during handling, it may lead to a low forming rate and a short service life when processing pellets.
The above are some tips on how to extend the service life of the ring die of the wood pellet machine. By following these four methods to maintain and care for the ring die, I believe your ring die can be used for a longer time