The straw pellet machine, as the name suggests, is a device that presses crop straw into straw pellets, and produces fuel pellet materials that can replace coal, making great contributions to environmental protection and energy industries. TONY straw pellet machine can press crop straw into straw pellets, and at the same time, it can also press other biomass raw materials.
Autumn and winter are the peak period for suppressing straw pellets. Pressed straw pellets are used in industrial boilers and civilian heating, bringing warmth in the cold winter, which can be said to be in short supply.
The following three issues should be paid attention to when producing the straw pellet machine:
1. Processing and pressing.
Trial operation should be carried out before feeding materials to check whether the parts are normal, and abnormal phenomena should be dealt with in a timely manner. In addition, the feeding should be uniform to ensure the normal production of the pellet machine. Since the newly produced straw pellets are relatively hot, they can only be stored and packaged out of the factory after drying.
2. Straw quality.
The newly harvested straw has a high moisture content and is prone to mold when stacked. It should be dried separately, kept ventilated and dried, and then stored. All straw pellet machines also have requirements for the moisture content of straw, so water control must be done well. The success rate is higher when the moisture content is about 15%.
3. Storage of straw.
Pay attention to the storage of bulk straw, stack it vertically as much as possible, and have a certain stacking distance in the middle to facilitate the evaporation of moisture in the straw. It needs to be exposed to the sun frequently to prevent mold.
Bulk straw storage is not the mainstream storage method in the straw granulation industry. It is generally common for baled storage. In the autumn harvest season, corn stalks are made into round bales of φ1200mm and φ1500mm through baling machines, and transported to the factory area for storage by transport vehicles. This type of straw round bale can be unpacked and broken by using our straw rotary cutter.