In the past, in the face of a large number of agricultural straw, people will choose to burn, but now, environmental protection issues have been a concern of the world, requiring us to pay attention to the protection of the ecological environment while developing the economy, so there is a straw pellet machine. Through the straw pellet machine, we can directly break the straw, will not produce environmental pollution. However, what details need to be paid attention to when using straw pellets.

First of all, when using the equipment, we should pay attention not to put stones, iron blocks, screws into the machine when putting raw materials, so as not to cause damage to the machine.

Secondly, the raw materials must be put in a timely and fast manner, and do not let the press wheel and the mill run idling for a long time.

In addition, it is necessary to check the tightness of the screw frequently, and whether the press roller bearing and the main shaft bearing are short of oil. And if there is a different response immediately stop to check whether there is foreign matter, clean up and restart.

Do not add too much raw material when using straw pellets in the early stage of operation. During operation, the total output of the new pellet machine is lower than the rated output, but after putting into operation, the output will reach the rated output. Attention should be paid to the grinding of straw pellet machine. It must stop running after it is acquired. Before the formal application, reasonable grinding is very important for the pellet machine. This is because the ring roller of the granulator is a very hot place. In the heat treatment process, there are burrs in the hole of the ring die, which hinders the movement and formation of the material during operation.