Straw pellet machine is a device used to convert biomass materials such as crop straw into granular fuel. Increasing the output of straw pellet machine is of great significance to improve the production efficiency and economic benefit. Here are a few effective methods:
1. Choose high quality straw pellet machine
The best way to increase the output of straw pellet machine is to buy a high-quality straw pellet machine. High-quality equipment usually has better performance and higher productivity.
2. Control the content of crude fiber materials
Coarse fiber is an important factor in the process of straw granulation. Too much content will lead to poor adhesion, difficult to form; Too little content is not conducive to forming. In general, the crude fiber content should be controlled at about 5%, and the specific value can be adjusted according to the actual situation.
3. Water control
The material moisture of biomass fuel must be strictly controlled, and it should generally be controlled at about 13%. If the moisture is too high, it will cause the particles made to be too loose, affecting the yield and quality.
4. Feed evenly
Ensuring uniform feeding can make the granulator granulation more smooth, maintain the high-speed operation of the machine, thereby increasing the yield.
5. Select an appropriate template aperture
Select the appropriate template aperture according to different uses to avoid the phenomenon of yield reduction or non-discharge due to too small aperture.
6. Adjust the gap between the template and the press wheel
Appropriate pressure can make the grain ripening degree and compactness to achieve the best results. The straw pellet machine is usually equipped with a pressure regulator screw, which can be adjusted to balance the pressure, thereby increasing the yield.
7. Keep the equipment clean
Regular cleaning of the pellet machine and keeping the equipment clean can extend the service life of the pellet machine and improve the use efficiency.
8. Lubricate regularly
Adding lubricating oil or lubricant to the pellet machine regularly can reduce friction and improve the operating efficiency of the machine, thereby increasing the output.
9. Increase the power of the pellet machine motor
Increasing the power size of the pellet machine can cope with the increase of the force required for screening work, so as to improve the output of the straw pellet machine.
10. Improve screen design
The length and width of the screen directly affect the screening efficiency and equipment output. Proper adjustment of the screen can significantly increase the yield.
In summary, through the purchase of high-quality equipment, reasonable control of raw material parameters, keep the equipment in good condition and timely technical improvement, the output of straw pellet machine can be effectively improved.