Many people purchase a pellet machine but don't know how to maintain it, thus shortening the service life of the machine. The professional technicians from Shandong Tony teach you how to use the pellet machine correctly and extend its service life.
During the use of the pellet machine, it is necessary to maintain it frequently. This can effectively prevent the decline in production output, delay production progress, and improve the service life of the machine. The regular maintenance measures for the wood pellet machine include:
1. Replace the lubricating oil of each component in time, clean the dust, and do not allow dirt to enter the sliding parts, which can prevent the machine from being damaged.
2. Do not allow the pellet machine to operate at a long-term overloaded state during use. Allow the machine to rest for a while to improve its service life.
3. Regularly check the wear condition of the molds. If the molds cannot be used any longer, replace them in time. Do not use inferior molds as they are cheap but prone to damage, resulting in unnecessary damage to other components.
4. After the wood pellet machine has been used for a period of time, check if there is any looseness in the connections of each part. Tighten them in time to avoid mechanical failures.
5. Clean the bearings of the press roller and the main shaft bearing in time. You can use gasoline or diesel for cleaning. The press roller bearings need to be regularly added with lubricating oil. During use, it is also necessary to pay attention to the following issues:
(1) Before filling the materials into the pellet machine, thoroughly inspect the materials and prohibit hard objects, iron blocks, etc. from entering the machine, which can cause damage to the machine components.
(2) The machine should be managed by professional operators. Do not let beginners operate it.
Before filling the materials into the pellet machine, thoroughly inspect the materials and prohibit hard objects, iron blocks, etc. from entering the machine, which can cause damage to the machine components.
(3) If there is abnormal noise or temperature rise in the machine, stop the operation immediately and check the cause before restarting. The temperature rise is often due to overloading operation. Allow the machine to stop and cool down appropriately before using.
(4) For newly purchased equipment, check the concrete of the foundation carefully, because the wood pellet machine has a high power during operation. If it cannot be fixed firmly, causing machine vibration, it can cause machine damage. Also, make sure the machine body is level and vertical.
(5) The newly replaced mold press roller should be ground first. You can operate it according to the user manual provided by the manufacturer. The edges of the newly replaced molds have some burrs. If used directly, it may affect the particle formation.