In summer, it is the peak period for the production of biomass pellets. Many users are operating the Zhangqiu wood pellet machine without stopping the machine. Among them, the wood pellet machine of the Tony brand is particularly popular, and its production efficiency is the most remarkable. During the operation of the ring die wood pellet machine, to better utilize the product, it is necessary to understand the performance, structure, application, daily maintenance and care of this product.

Every time TONY wood pellet machine manufacturer delivers a pellet machine to the customer's site, they will provide on-site personnel with hands-on guidance on how to use it, how to maintain it, as well as the features and precautions of the equipment.Here, TONY will once again present in writing the precautions and maintenance for using the pellet machine in summer.

I. Pre-startup inspection

1. Observe the appearance of the main unit and its supporting equipment. Check if the connecting screws and components on the equipment are loose (including the wire pressing screws inside the electrical control cabinet).

2. Check for any foreign objects or tools in the granulation chamber

3. Has the gap between the mold and the press wheel been adjusted to the suitable gap range for granulation

4. Observe whether the position of the gear oil gauge in the gearbox is within a reasonable range

5. Check the oil level of the yellow oil pump, whether the oil quality meets the requirements, and whether there is any damage to the pipeline

6. Dust conditions inside the motor and the electrical control cabinet should be cleaned up in a timely manner to prevent poor heat dissipation due to dust issues

Ii. Startup and Operation Process

1. Turn on the machine and let it idle for a short period of time. Pay attention to whether there is any abnormal noise from the machine

2. Observe whether the rotation directions of the motors of each device are correct

3. Use oil that meets the requirements for grinding work before formal production (it is recommended to replace the oil regularly, which is beneficial for equipment maintenance).

4. Observe whether all the instrument panels of the electrical control cabinet display normally

5. Feed materials gradually, starting from slow feeding to continuous feeding. Do not start with continuous rapid feeding at the very beginning. This is conducive to observing the current of the electrical control cabinet and making timely adjustments

6. Observe the particle condition of the finished product at the discharge port. If the density is too tight or too loose, adjust it in time.

Iii. Work Completion and shutdown process

1.Grind the oil material and inject the biomass raw materials into the die holes to keep the oil material in the die holes.

2. Shut down each component and the main unit in sequence on the electrical control cabinet

3. Cut off the power supply and ensure that the power is disconnected when no one is around

4. Connect a high-pressure air pump to an air gun to blow out the dust generated during the production process, especially in the areas of the electrical control cabinet and motors

5. In summer, keep the environment clean and check for any open flames. The biomass raw materials around should be collected and processed centrally

6. Clean the dust inside the bag filter.

The above is the method summarized by TONY on how to use and maintain the biomass pellet machine in summer. It is hoped that it will be helpful to the customers who are currently producing or about to produce biomass pellets.