The emergence of sawdust pellet machine, especially the TONY pellet machine brand, has solved the problem of discarding agricultural and forestry waste, and has reused the scrap waste from wood processing plants and furniture factories, transformed into wood chip fuel pellets worth thousands of yuan/ton. Many are used in areas with boilers, civil heating, industrial and other fields. More and more customers are coming to Zhangqiu to buy TONY wood chip pellet machine. The editor briefly introduces a few applicable techniques here, which will be helpful in actual production.
4 tips for using TONY sawdust pellet machine:
1. Water content in raw materials
It is recommended that the moisture of the material should be adjusted to within the range of 10%-15%. Use a TONY wood chip pellet machine. Small floating within the moisture range can be made of granularity.
2. Grinding before use
Because the mold of the pellet machine has many burrs after planing, drilling, milling, quenching, etc., which affects the effect and yield of the granulation, it is necessary to grind reasonably and thoroughly before using the new machine (or replacing a new mold). Grinding materials are commonly known as oil, which are mixtures of wood chips, waste engine oil, and fine sand. They can be reused and used multiple times at a time.
3. Work priorities before shutdown
When the material pressing is about to end, put the oil into the machine, press for 1-2 minutes and shut down, so that the mold hole can be filled with oil, so that the material can be put into production next time the machine is turned on. It not only maintains the mold, but also saves working hours. After shutdown, loosens the press wheel adjustment screws and removes residual materials.
4. Treatment of particle fuel coarse, thin length and moisture temperature
The thickness is completed by replacing molds with different apertures. The pellet machine generally has a length adjustment cutter at the discharge port, which can be adjusted according to actual needs.
For more tips for using sawdust pellet machine, please contact us directly.