It is the peak season for biomass pellet fuel demand, and pellet fuel manufacturers are working hard to carry out production work. We found that many users of newly invested pellet fuel plants have no problems with equipment use and maintenance, but may not be aware of later management, such as production environment safety, and do not do it well.

Nowadays, most pellet fuel plants have raw materials accumulated in the processing workshop after they are collected. Most of the raw materials are mainly wood and corn stalks. Such substances are flammable products and must be prevented to achieve the effect of preventing problems before they occur. Here we have summarized several places with safety hazards, hoping to help users and effectively prevent and eliminate safety hazards in the factory.

1. It is prohibited to contact open flames, smoking, etc. in the workshop, which are the direct factors that cause fires.

2. After the installation of the wood pellet machine equipment, we should orderly and orderly the wires and cables connected to the installation equipment, and take protective measures on the outside of the cable. Do not cross or wrap the wires and cables. Be sure to protect the cables to avoid scratching the cables. Once dust comes into contact with the cables, it is extremely easy to cause fires.

3. When the machinery and equipment are used normally, the equipment must be inspected and maintained regularly.

4. During the operation of the pellet machine equipment, it is necessary to check and fill oil frequently. During the high-speed operation of the machine, the oil circuit must be kept in good time. Once the grease is missing, the equipment will produce a higher temperature when it is running at high speed, which is easy to cause damage to the motor and bearings.

5. Protect fire-fighting equipment in necessary areas in the factory to prepare for emergencies and do a good job in regular maintenance and maintenance. Once a fire occurs, the fault can be solved more quickly.

6. Personnel regularly train safety knowledge to reduce the incidence of safety hazards.

7. The editor learned that users who use TONY wood pellet machine currently operate continuously for 20 hours, and workers implement a two-shift system. For this type of working method, it can ensure that someone supervises and controls it for a long time, and even if safety problems occur, they will be solved in a timely manner. If other sites implement long-distance shift production, or only night production, once problems occur, no one solves them in a timely manner, it will cause more serious harm. Therefore, TONY reminds that at the end of the production task, it is necessary to clean the site and deal with the safety hazards on the site in a timely manner.