These days, I have received many questions from breeding friends: "How to choose a feed pellet machine? I don't know about feed pellet machine. Where should I start with buying a feed pellet machine?" TONY suggests that when buying a feed pellet machine, it is best for breeding friends to learn about the common sense of feed pellet machine first. The editor has compiled 5 key points for you, you can refer to:

1. Choose the purpose of pellet feed. 

Straw pellet machine are multi-purpose, such as breeding pellet feed: they refer to pellet feed for pigs, chickens, cattle, sheep and other poultry. Find out which pellet feed you need to choose the type of feed pellet machine.

2. You cannot blindly choose based on the price of the feed pellet machine. 

We all know that flat-mold feed pellet machines are generally much cheaper than ring-mold feed pellet machines. This is not only the difference in output, but also the quality and structure are different.

3. Power and output of feed pellet machine

First, you need to choose the power of the feed pellet machine, and then choose the model. If the home is three-phase electricity, choose the corresponding feed pellet machine. The other is the output of the feed pellet machine. I believe that many breeders are very clear about how much feed the farm needs every day, and the feed pellet machine generally marks the time output. When choosing a feed pellet machine, pay attention to this conversion.

4. Selection of grinding disc of feed pellet machine. 

This is generally determined based on the breeding variety. Generally speaking, the pellet feed required for chickens and fish is relatively fine, generally between 2.5-4mm, and the diameter of the pellet feed of poultry and livestock such as sheep, pigs, is relatively in line with their diameter range of 4-6mm. The pellet feed needed by livestock such as cattle and horses will be relatively thick, and the mold hole diameter can be controlled at 6-8mm.

5. Common knowledge about moisture in feed pellet machine. 

Generally speaking, when making pellet feed, the moisture contained in the material itself is between 12% and 18%, and during the entire pelletization process, there is no need to add water, so the moisture in the prepared pellet feed is almost equivalent to the moisture content contained in the original material. If the moisture content of the raw materials for making pellet feed is too large, it needs to be dried and processed first.

If you would like to know more about the feed pellet machine, please contact TONY.