The following are some measures summarized by TONY, which can effectively improve the smoothness and granularity quality of the biomass pellet machine , thereby improving the overall production efficiency and product quality.

1.  Feeding should be uniform

Benefits: It can make the pellets of the pellet machine smoother and keep the machine's high -speed operation.

2.  Choose the right template diameter

Important: Select the appropriate template aperture according to your own use to avoid low or unspestable production due to the small pore diameter.

3.  Adjust the gap between the template and the pressure wheel

Function: Appropriate pressure can make the maturity and density of the pellets achieve good results.

4.  Keep the granular machine clean

Important: regularly clean up the pellet machine, extend the service life of the machine, and improve the efficiency of usage.

5.  Keep the pellet machine lubricating regularly

Methods: Regularly injected butter, add lubricants, and clean to improve the efficiency of the machine's use.

6.  Check and maintain key components

(1) pressure roller

Function: The pressure roller is an important part of the tightening room.  It needs to be continuously rolled so that the material is squeezed out of the mold hole from the mold hole.  The pressure roller pine can cause the gap between the pressure roller and the mold to become larger, the pressure is reduced, and it will affect the discharge.

(2) motor

Requirements: The motor requires a certain voltage to work normally.  Too low voltage may lead to insufficient power and affect material extrusion molding.

Impact: The damage of the spindle will affect the normal work of the compressive parts, resulting in the inability to discharge the materials in the tightening room.

7.  Control the moisture content of raw materials

Standard: The moisture content of the raw material should reach 15%after the modulation, and too high or too low will affect the formation and quality of the pellets.