TONY Palk Fiber Machine is mainly used to loosen the hard fibers of oil palm, palm and coconut shell and knead them into filaments. The products produced by the wire cutting machine are filament-like, which are raw materials for the production of palm mattresses, insoles, seat cushions, etc., and the market is very broad. As far as the structure is concerned, there are currently two kinds of single barrel and double barrel: one is a single barrel wire opener, suitable for a large variety of palm raw materials; One is a double-barrel wire opener, which is suitable for users who require dry coconut shell or high wire opening effect; In terms of power type, there are currently two types of electric models and diesel models: the machine is mainly used in remote villages in Southeast Asian countries. Motor models are generally equipped with motor power is: single barrel wire opener with 55kw-1motor, double barrel wire opener with 55KW-37KW-2 motor; Diesel type wire opener is generally only suitable for the single barrel wire opener where the power is not convenient.

Alm oil production is a very important industry in Southeast Asia. After the palm ripens, the fruit separates from the stem, leaving behind an empty fruit bunches (EFB) that becomes a waste product. Millions of tons of EFB are produced every year, and research into the possibilities of using this waste is ongoing.

Most treatment of EFB involves burning the ash and using it as fertilizer for plants, but combustion causes a lot of environmental pollution and other treatment methods have to be found. EFB contains vascular bundles in its parenchyma and this material is very elastic and has very low density. Several studies have shown that EFB can be used to make paper, and EFB- a non-wood fiber feedstock - has a wide range of potential uses as a boiler fuel.

If it is directly burned, it will pollute the environment, generally EFB is made into biomass particles, which is conducive to storage and protects the environment, and is currently a very good method of resource utilization.

Before the production of biomass pellets, it is necessary to use a special equipment to open the palm fruit string, which is the TONY Palk Fiber Machine

Palk Fiber Machine is aimed at the current palm industry in the production of large pieces of palm is not easy to use, palm fiber texture is very hard, easy to cut, tear, pull, etc., these materials stack up space, discard not easy to rot will cause harm to the environment

TONY Palk Fiber Machine is composed of feed port, upper shell, lower shell, base, two sets of transmission devices, high-speed cutter roll, bottom cutter, low speed cutter roll and other components. The base is installed and fixed on the foundation, the lower shell and the base are bolted, the bearing seats of high-speed cutter roll and low speed cutter roll are all fixed on the base, and the base is welded with a adjusting plate. The radial clearance between the two cutter rolls can be adjusted, and the discharge port is arranged in the middle of the lower part of the base, and the lower part is connected with the rapid transport device to remove the fruit string fiber after the yarn splitting in time.

TONY Palk Fiber Machine is fed into the feed port of the dividing machine by the conveyor. After axial distribution, it enters between the high and low speed dividing cutter rolls of the dividing machine. Under the action of the cutting edge of the dividing blade at different rotation speeds, the palm fiber is cut into the required brown fiber. At the same time, due to the different speeds of the two rollers, the fruit ball rolls between the two rollers and keeps getting smaller. The Angle of engagement of the two rollers is not less than 90 degrees, so that the fruit ball can only roll without squeezing between the two rollers, which can prevent the fruit ball from falling between the two rollers and causing a sharp rise in the load of the cutter roller leading to motor overload. The shredded palm fiber enters the lower discharge port from under the blade band. To prevent the fibers from returning to the upper part of the roll, the two rollers are equipped with a comb bottom knife, which can comb out the filamentary fruit string fibers brought down by the blade without returning to the feed port on the upper part of the roll.

1.It is used for oil palm, coconut and other hard surface to crush and loose fibers apart and rub into the wire. 2.Feeding the raw materials from the inlet of machines. 3.Knives in the machines roating quickly to crush the palm skin. 4.The crushed raw material rotary agitation inside the device and rub into filamemtous, the finished products are transported through the discharge port. 5.Belts conveyors are built under the palk fiber making machine to transport the finishe products directly. 6.The equipment kneading box has a leak hole, which can miss the impurities in the crushing process, so that the impurities do not mix with the finished material. 7.Large output, can produce at least dozens of tons per day.

1. The discharge port is arranged in the middle of the lower part of the base, and the lower part of the outlet is connected with the rapid transport device to remove the fruit string fiber after spinning in time. 2. The spacing ring ensures the gap between the blades, and double nuts lock the dividing blade to prevent it from loosening. 3. The adjacent splitter blades on the same knife are staggered at a certain Angle to reduce the simultaneous stress of the wire blades during the work of the splitter. 4. The working speed of the two knife rollers is designed to have a speed difference. Ensure the safety and stability of the slitting process. Avoid palm empty fruit slipping between two knife rolls, difficult to feed. 5. Fix a comb bottom knife on the base, and remove the cut fibers to ensure that when the knife roller rotates to the feeding position, there are no fibers blocked between the knife rollers, which will affect the cutting effect.

Biomass pellets made from EFB have a high calorific value and can be used as fuel. The market demand is very broad, such as: 

1. Civil heating and living energy, clean, pollution-free; 

2. Industrial boiler and kiln fuel, replacing coal and gas, to solve environmental pollution; 

3. It can be used as a fuel for gasification power generation and thermal power generation to solve the problem of shutting down small thermal power plants.

	1. Professional Team Quality Assurance The company has a high-quality staff group, perfect management system, rich experience, with their own talent advantages, market-oriented, adhere to the "cooperation, win-win, mutual benefit" cooperation policy, won the recognition and commendation of many partners.
	2. High Production Efficiency And Fast Delivery Speed The company has rich production experience, stable supply and fast delivery speed.
	3. It Has Been Widely Praised For Many Years Since its establishment, the company has been widely praised by customers with its complete specifications, high-quality products, real prices, thoughtful and meticulous service.
	4. After-Sales Worry Free Time And Worry TONY is a comprehensive enterprise integrating research and development, sales and production. With a professional R&D, sales and service team, let you buy more assured.

1.TECHNICAL GUIDANCE:  According to your capacity and raw materials, recommend the right model； customized design and flow chart for customers. 2.24 HOURS REPLY: 24 hours online service, you can contact us at any time. 3.FIELD VISIT: Visit our factory for inspection and performance test. 4.COMPETITIVE PRICE: First-rate, attractive andreasonable price to earnrour reliance and followon orders. 5.STRICT QUALITY INSPECTION: We have strict quality management system and quality inspection department, 1 year warranty (except wearing parts).