During the operation of the biomass pellet machine, we often find that the products produced during the machine's operation are in an unformed state. This is mainly because the pressed Pelletss are very loose and cannot even be formed into pellets. So, do you know the factors causing the non-forming of the environmental-friendly biomass pellet machine? Today, the biomass pellet machine manufacturer will introduce this information to you in detail. Let's take a closer look at this aspect of information now!
Firstly, the moisture content of the raw materials: During the pelletizing process of the biomass pellet machine, the moisture content of the wood chips is already sufficient. Therefore, when using it, it is necessary to pay attention to the addition of moisture. The moisture content should generally be below 20%, although this value is not absolute. Different raw materials have different requirements. For example, when making pellets from pine, fir, or eucalyptus wood chips, our pellet machine requires a moisture content of 13% to 17%. Specific requirements can be answered by contacting our professional staff.
Another aspect is the principle of the pellet machine. In the production process, we mainly have different fiber structures of the biomass pellet machine, so the difficulty of forming also varies. Sometimes the Pelletss do not form. Materials that are difficult to compress, such as palm, are one example. Another factor is that if it is a mixed material, the mixing ratio of various components will also affect the forming rate. The factors of the straw pellet machine. The compression ratio is a parameter of the pellet machine mold, which refers to the length of the mold hole divided by the hole diameter. The larger the compression ratio, the thicker the template, and the longer the time for material compression, the higher the forming rate of the Pelletss.
The above introduces two reasons for the unformed Pelletss of the biomass pellet machine. The first is the moisture content of the raw materials, and the second is the principle of the pellet machine. If you want to know more about pellets and the information of the pellet machine, you can contact TONY at any time.