The pellets produced by the TONY biomass pellet machine are a kind of combustion material with high conversion efficiency, which is very green and environmentally friendly, and can improve the quality of the environment we live in. If biomass pellets are to be fully combusted, the following four conditions for complete combustion must be met.
1. Moderate air quality
Oxygen in the air is a necessary condition for the combustion of objects. The combustion of biomass pellets also cannot do without oxygen, but it does not mean that the more, the better. If the oxygen supply of a biomass boiler is too large, it will cause the furnace temperature inside the boiler to be too low, resulting in incomplete combustion of biomass pellets and waste of fuel value. If the supply of air is insufficient, it will cause a significant increase in the emission of particulate flue gas. Therefore, the supply of air must be controlled.
2.Try to increase the boiler temperature as much as possible
The temperature inside a biomass boiler directly determines the combustion degree and utilization rate of biomass pellets. The higher the furnace temperature, the more complete the combustion of biomass pellets. Therefore, when using biomass pellets, under the premise of ensuring that the boiler does not form coke, the temperature of the boiler should be increased as much as possible.
3.The particles and air should be thoroughly mixed
During the combustion stage of a biomass boiler, it is necessary to ensure the thorough mixing of air and fuel. Ensure that the fuel stays on the grate and in the furnace for a sufficient period of time, so that the combustion is more complete, the combustion efficiency is improved and the cost is saved.
4.Reasonable position of the flame front.
The front edge of the biomass boiler flame should be located in the area between the high-end grate and the middle grate, and the flame should be well filled on the grate.
The above four conditions are external factors and can be intervened artificially to achieve the desired effect. For biomass pellets to burn better, it mainly depends on the pellets themselves, such as the density of the pellets. Pellets with low density and loose texture definitely cannot achieve the expected effect. This is related to choosing a good biomass pellet machine. For instance, the new type of biomass pellet machine produced by TONY Company in Zhangqiu can not only press the pellets densely but also press various types of raw materials, with up to hundreds of types. Common ones include: Idle waste materials, straw, furniture factory scraps, sawdust, wood shavings, rice husks, branches, bamboo strips, peanut shells, sugarcane bagasse, distiller's grains, sludge, etc. All kinds of combustible biomass materials can be used as raw materials for the production of biomass fuel.
For more information on pellet fuel and biomass pellet machine production line, please follow TONY Biomass pellet Machine Manufacturer.