1. Electrical failure

(1)Inadequate power supply of the motor: It may be caused by poor power lines or motor failure. It is necessary to check whether the power wiring is correct and whether the motor is operating normally;

(2)Motor starter damage: It will cause the motor to fail to start or work normally. You need to check whether the electrical switch is normal and replace the starter if necessary.

2. Mechanical failure

(1)The belt is loose or broken: it is necessary to check whether the belt is tight and replace the damaged belt in time;

(2)The transmission chain is out of chain or loose: it is necessary to check the tightening of the transmission chain and whether it needs to be replaced;

(3)Bearing damage: It may be caused by long-term use or improper maintenance of the machine, and the bearing needs to be replaced.

3. Other factors

(1)Internal failure of biomass pellet machine: if the pressing wheel is stuck, the internal inspection of the biomass pellet machine needs to be carried out;

(2)The biomass pellet size is too large or the humidity is too high: This will cause blockage of the biomass pellet machine. The solution is to replace pellets of appropriate size, or reduce the humidity of pellets.

To sum up, the failure of the spindle of the biomass pellet machine may be caused by a variety of factors, and it needs to be checked and solved one by one. When using a biomass pellet machine, you need to pay attention to the maintenance of the equipment, discover and resolve faults in a timely manner, and ensure the normal operation of the equipment.