When using the equipment, the operator needs to understand and comply with a series of operating specifications and precautions to ensure the safe operation of the equipment and extend the service life. Here's what operators need to know based on the search results:

1.Preparations before the operation

Before starting the machine, the operator should check the direction of operation to ensure that the sign of the feed pellet machine is consistent with the actual direction of operation. At the same time, it is necessary to relax the two adjusting screws on both sides of the cover, that is, the screws on both ends of the press wheel. Boot should be started without load to avoid unnecessary wear and tear to the equipment.

2.Equipment maintenance and maintenance

The temperature of the biomass pellet machine is high in the working process, so the quality of the lubricating oil has a great impact on the lubricity of the bearing. The operator needs to regularly check the gear oil in the gearbox, and perform maintenance every six months to add high temperature grease to the spindle and bearings. In addition, when the press wheel is processed to a certain weight (e.g. 5000 kg), it is necessary to remove the press wheel and grease the bearing.

3.Mold change

If you need to replace the mold of the biomass pellet machine, you should first remove the press wheel and the cutter. Then, the barrel can be removed, the nut on the spindle can be unscrewed, and the die can be lifted out using the accessory tensioner. These steps need to be familiar to the operator and performed correctly to ensure a safe and efficient replacement process.

4.Safety precautions

In daily operation, the operator should also pay attention to check whether the equipment is installed in place and whether the screws in each part are fastened. Especially for geared models, ensure that the gear has sufficient lubrication. The equipment should be placed on a flat dry hardened ground to increase stability.

5.Controlled feed properties

Operators need to strictly control the nature of the feed to ensure that the raw material is suitable for the processing requirements of the biomass pellet machine. This includes checking the moisture, particle size and other physical and chemical properties of the raw material to avoid equipment failure or product quality due to raw material problems.

These are the main points that biomass pellet machine operators need to understand and comply with in the operation process. By following these operating specifications and precautions, operators can effectively improve work efficiency, ensure the safe operation of equipment, and extend the service life of equipment.