In order to ensure the long-term efficient operation of the wood pellet machine, regular maintenance and maintenance is essential. Here are some key maintenance steps:

1. Refuel regularly

Transmission part: Periodically fuel the transmission part of the wood pellet machine to ensure its flexible rotation and reduce the working load56.

2. Replace the lubricating oil

Gear box: Change the lubricating oil in the gear box of the wood pellet machine regularly.

3. Check the connection components

Connecting parts: Check once a week whether the connected parts are loose, whether the travel safety switch is reliable, and clean the feed and conditioner to avoid mechanical failure.

4. Check for wear

Check once a month to check whether the worm gear, worm, bolts, bearings and other moving parts on the lubrication block are flexible and wear, and replace them in time if there is wear.

5. Avoid overloading

Production load: Eliminate overload production, so as not to damage parts and shorten the service life of wood pellet machine.

6. Raw material impurity removal

Raw material treatment: Do a good job of removing impurities from raw materials, avoid foreign matter entering the ring mold studio, and prevent damage to equipment.

7. Check oil temperature and noise

Oil temperature noise: When it is found that the oil temperature is too high (more than 80 ° C) or there is abnormal noise, it should be stopped immediately, check the cause, troubleshoot or replace the lubricating oil before continuing to use

8. Storage precautions

Storage environment: Store the wood pellet machine in a dry and clean room, and avoid use in places containing acids or other corrosive gases in the atmosphere.

Long-term disuse: If the disuse time is longer, the whole body of the machine must be wiped clean, the smooth surface of the machine parts coated with anti-rust oil, and covered with cloth.

9. Mold and roller maintenance

Mold preservation: When the mold is stored for more than half a year, the oil in the mold needs to be replaced to avoid hardening of the oil.

Ventilation and drying: the mold is often stored in a ventilated and dry place to avoid corrosion caused by humidity.

Clean up the interior: When removing the press roller and die for storage, it is necessary to clean up the internal particles.

Through the above maintenance measures, we can ensure that the wood pellet machine can maintain an efficient and stable working state for a long time, extend the service life of the equipment, and reduce maintenance costs.