The raw materials for biomass particles are very wide. They use sawdust, wood shavings, bark, leaves, waste wood, branch materials produced in wood processing and artificial board production, various straws produced after crop harvesting, and other combustible biomass as raw materials. No adhesive is required. Biomass pellet fuel can be produced through equipment processing and processing. TONY biomass pellet machine is a biofuel pellet forming equipment and equipment. The product effectively solves the defects of difficult and poor results for biocoarse fibers. The main transmission of the wood chip pellet machine uses belt transmission. The ring mold adopts a fast unloading hoop type, and the feeding is fused with frequency conversion speed regulation to ensure uniform feeding.

Biomass pellet fuel needs to be fully burned

Appropriate amount of air: If the amount of air is too small, the combustible component cannot be fully burned, resulting in incomplete combustion loss; but if the amount of air is too large, the combustion chamber temperature will be reduced and the degree of complete combustion will be affected.

Full combustion time: The fuel combustion has a certain speed, reaches a large combustion level, and makes the combustion take a certain amount of time. The big problem with combustion regulation is to maintain the residence time of combustion in the combustion furnace as much as possible. Complete combustion can be achieved as long as there is enough combustion time. Able to mix oxygen in time: primary wind is enough to blow away and penetrate fuel; secondary wind is strong and enters quickly, and no oxygen can be deficient in the combustion of intense combustion. In the upper part of the furnace combustion area, sufficient oxygen must be maintained. The upper secondary air must be opened as much as possible, and the three superheaters do not use superheat as the boundary. After the flame in the furnace, the temperature field gradually decreases.

The wood chip pelletizer is a equipment that uses tangerine wood, cypress, poplar wood, fruit wood, crop straw, bamboo chips, etc. to crush it into sawdust bran, and process it into biomass fuel. Due to the different raw materials used in different places, biomass pelletizers are also called wood chip pelletizers, straw pelletizers, sawdust pelletizers, wood pelletizers, bamboo chip pelletizers, fuel pelletizers, straw pelletizers, rice husk pelletizers, etc. They are also called granulators and granulators. Although they are different, they are all the same machine.