Dual Shaft Mixer_Mixing Equipment_Products

1.Thermal Power Plants And Mines: Mainly used for humidification loading of fly ash or similar materials, and the treatment of solid particle materials.

2.Chemical Industry: Used for drying and mixing of powder materials such as dry mortar, pesticides, detergents, etc.

3.Organic Fertilizer Productior: Suitable for various raw material types such as agricultural waste, food processing by-products, landscaping waste, industrial by-products, etc. ‌

4.Brick And Tile Production: Mainly used for raw materials for brick and tile production, such as clay, shale, silt, coal gangue and fly ash, etc. ‌

The working principle of the Dual-shaft mixer is to ensure uniform mixing of materials through forced mixing and stirring. Different types of Dual-shaft mixers(such as twin-shaft cement mixers, twin-shaft paddle-type gravity-free mixers, etc.) are designed and optimized according to specific application scenarios to meet different mixing needs.

Shell: The shell is mainly composed of plates and steel sections, which are welded and formed in the manufacturing plant and assembled with other parts as the support of the Dual-shaft mixer. The shell is tightly sealed, and there will be no flying ash or leakage.

Screw Shaft Assembly: This is the core component of the Dual-shaft mixer, including left and right rotating screw shafts, bearing seats, bearing sleeves, bearing covers, gears, sprockets, oil cups, etc. The left and right rotating screw shafts are manufactured with high precision, and the gears and sprockets are protected by protective covers to ensure stable operation.

Blades: The blades are made of wear-resistant and non-sticky composite ceramic materials, with reasonable structural design, easy to replace after wear, and long service life.

Transmission Device: The motor is decelerated through V-belt transmission and planetary reducer, and the power is transmitted to the mixing spindle through the spline shaft and spline shaft sleeve. The two reducers are connected by a synchronous transmission shaft to ensure the synchronous rotation of the two mixing spindles.

Discharge Door: The discharge door consists of the discharge door body, cylinder, and proximity switch to achieve fully automatic control and ensure accurate control of material discharge.

The working principle of the Dual Shaft Mixer is mainly based on the synchronous rotation of two symmetrical spiral shafts. When the two shafts start to rotate, they not only play the role of conveying powdery materials such as dry ash, but also make the materials evenly humidified by adding water and stirring. In this process, the design of the mixing blades is the key. They can effectively push the materials in different directions and form a flow state, thereby achieving uniform mixing and humidification of the materials.

The Dual-shaft mixer uses two symmetrical spiral shafts to rotate synchronously. While conveying dry ash and other powdery materials, water is added to stir, so as to achieve the purpose of evenly humidifying the dry ash powdery materials, thereby facilitating the loading and transportation of humidified ash or transferring it to other conveying equipment. This equipment is mainly suitable for thermal power plants, mines and other industries, and is used for humidifying and loading fly ash or similar materials.

The core advantage of the Dual Shaft Mixer lies in its efficient, stable and environmentally friendly design. This mixer integrates mixing, humidification and conveying, with good mixing uniformity, high production efficiency and large production capacity. It is particularly suitable for humidification of fly ash or similar materials in thermal power plants, mines and other industries.

Specifically, The Advantages Of The Dual-Shaft Mixer Include:

‌Efficient Production: The Dual Shaft Mixer adopts a continuous working mode, supports loading, mixing and unloading at the same time, and effectively improves the mixing production efficiency compared with conventional mixing equipment.

Stable Performance: The mixing device made of alloy castings is equipped with a high-power motor and a planetary reducer with high rated output torque to ensure stable operation of the equipment.

‌Environmentally Friendly Design: The mixing and conveying process is carried out in a sealed space, which will not cause dust leakage, and is clean and environmentally friendly.‌

Wear-Resistant Material: The mixing blade is made of wear-resistant material and is specially polished to have high wear resistance.

Compact Structure: The whole machine has a compact structure, small space occupation, stable transmission, high reliability and low noise.

‌Versatility‌: Suitable for humidifying and loading fly ash or similar materials in thermal power plants, mines and other industries, effectively improving production efficiency‌.